Xbox one elite controller series two smalls paddles don't click?

Each Elite controller series 2 comes with 1 set of paddles. You can order replacement paddles, thumbsticks etc.

Series 1 paddles, thumbsticks is not compatible with series 2.

elite series 2 controllers back paddles won’t work

Hi and thanks for reaching out. I hope you’re doing well. I'm an Independent Advisor and a Microsoft user like you and I'll be happy to help you.

I apologize for the issue you're experiencing with your Xbox Elite Series 2 controller. Kindly follow the steps below to try to resolve the issue:

1. Make sure the controller is updated to the latest firmware. To do this, follow these steps:

2. Make sure the paddles are properly attached to the controller. If the paddles are not properly attached, they may not register when pressed.

3. Check the preset configuration for the paddles. Go to "Settings" and select "Devices & streaming," then choose "Accessories" and select your Elite Series 2 controller. From there, you can adjust the preset configuration for the paddles.

4. If none of the above steps resolve the issue, you may need to reset the controller. To do this, follow these steps:

- Press and hold the small sync button on the top of the controller until the Xbox button flashes.

- Let go of the sync button.

- Press and hold the sync button on the controller again until the Xbox button stops flashing.

If you continue to experience issues with the paddles on your Elite Series 2 controller, you may need to contact Xbox Support for further assistance.

I have an elite series 2 controller. All of the paddles are the same color.

Have you tired using both series 2 small paddles on one side and one long paddle on the other side as a shift key? I found this to be the next best thing to the scuf paddles unless you want to buy a second set of paddles to do smalls on both sides. I also
use a microsoft chat pad on my controller so my hope is that scuf doesn’t interfere with that if they come out with a replacement that will somehow attach to the outside of the controller.