Xbox One Controller Expansion Port Devices

Alberic,

Unfortunately you can't at the moment. Legacy headsets will not be compatible with Xbox One at launch. The Wireless Controller has been redesigned to allow for higher data transfer speed between the controller and the console. This also required creating
a new expansion port design for headsets and future controller add-on devices which is different from a standard audio plug input. An adapter is being developed but will not be available for purchase until early 2014.

• Disconnect the headset or unplug the headset cable from the bottom of the controller, and then reconnect it firmly to the controller (in the expansion port for a headset or the 3.5-mm port for a 3.5-mm chat headset).

If you have a 3.5-mm chat headset, never pull on the headset cable when removing it from your controller. Remove your headset from your controller by pulling on the body of the headset plug.

• Make sure the headset is not muted. To do this, check the mute button on the headset controls. (For a headset, the mute button is on the left side of the connector that is plugged into the expansion port of the controller. For a 3.5-mm chat headset, the
  mute button is a slider button on the front of the audio controls that are in the middle of the headset cable.)
• Increase the audio. If you're using a headset plugged into the 3.5-mm port, go to Settings, choose Devices & accessories, and then select your controller and adjust your audio options.
• Try using a different controller or headset to check for a hardware malfunction.
• Update your controller to make sure you have the latest software. See Attach an Xbox One Chat Headset to an Xbox One Wireless Controller.

Yes, the headset adapter is compatible with all xbox one controller including your elite controller series one

"No matter what kind of Xbox controller you have, you can connect the Xbox One Stereo Headset Adapter to your controller by plugging it into the rectangular expansion port on the bottom of
your controller"

TriggahoIic,

Unfortunately you can't at the moment. Legacy headsets will not be compatible with Xbox One at launch. The Wireless Controller has been redesigned to allow for higher data transfer speed between the controller and the console. This also required creating
a new expansion port design for headsets and future controller add-on devices which is different from a standard audio plug input. An adapter is being developed but will not be available for purchase until early 2014. Hope this helps!

all the old and new controllers work with the turtle beach adapter, they just added a 3.5 jack to the newer ones, the expansion port is still the same, i use one on the latest controllers too.