Xbox One controller Adapter Driver issue

"You must update the drivers:

Click "Network Adapter" to expand the menu and right-click "Xbox One Wireless Adapter for Windows" > Update Driver Software > Search Automatically for Updated Driver Software"

This fixed the audio issue I was having with the controller connected via the Wireless Adapter (it worked via USB but not wirelessly until I manually updated said network adapter driver). Thanks!

To the OPs problem for no sound and no vibration that should be fixed with the latest driver updates.

For pairing, how are you pairing the controller? I have mentioned this on other posts, one easy alternate way to pair is to have your controller connected wired to the PC, plug in the Wireless Adapter to the PC as well, wait like 5 seconds, and unplug the
controller, the driver stack will automatically have paired the controller to the adapter, just like on the Xbox.

Once you pair the controller successfully and never use that controller for any other PC or Xbox, then the address of the adapter is saved in the controller. Repairing to the same adapter is not required. If it is not connecting, plug/unplug the adapter
instead to reset the adapter.

We are working with our partners to address some of the major issues.

If you install the ones on the site linked above, those are drivers that will support the bare minimum, no audio and peripherals will be recognized on the controller. The trigger problem seems like a game specific issue. You can use joy.cpl (Start->Run->joy.cpl)
to check calibration for the xbox one controller with win10 drivers vs the 360 controller or the drivers from major nelson's website.

Make sure to get the latest drivers from windows update, by going to device manager, right click on the Xbox One Wireless Adapter and Update the driver.

Plug your wireless adapter into your PC and press the button on the edge. Once you press the button, it will automatically install Xbox One controller drive. also could be the adapter giving
you issues.

I tried that and it didn't automatically install anything. The adapter isn't broken either, as it works with the xbox 360 controller. Is there a way I can manually install the correct Xbox one drivers so it can connect to the adapter?

First check device manager, (Win+X->Device Manager) if you actually see under Network Adapters something like "Xbox Wireless Adapter for Windows". If you see "XBOX ACC" then right click, "Update Driver Software"->"Search automatically for updated driver
software".

Next make sure there are charged batteries in the controller

For pairing your controller to the adapter, either

* Connect the usb controller through a USB cord (you can use one used for phones, one end micro USB, the other USB), wait for a little while, the driver will automatically pair the wired controller to the adapter, unplug and it should flash and find the
adapter (light would turn solid)

* OR, press the pairing/enroll button on the adapter, then press the pairing/enroll button on your controller, light on the controller should flash and then turn solid once paired.