Xbox one beep twice and complete set up problem

oioiAlex83 · Oct 22, 2018

Everytime i turn my xbox on it beeps twice and then goes to a black screen with trouble shoot, continue, update offline and restart this console. I click continue and it doesnt do anything, so i have to unplug the power supply and start again, which seems
to work...but i have to set up the xbox as if it were a brand new set up! Ive been looking on google for months and cant find any solution!!!!! Please PLEASE help

:)

gds1972 · Oct 22, 2018

Xbox One won't connect to tv

You may want to try the support steps in the link below as this might be of use.

support.xbox.com/.../tv-or-monitor-screen-is-blank-while-connected

Especially this part.

"Reset your display settings. Here's how:

If there's a disc in the Xbox One console, eject it.

On the console, press and hold the Xbox button for five seconds to turn off the console.

Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep straight away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second
beep occurs.

Note This will boot your console in low resolution mode (640 × 480). To reset this setting, go to Settings in the guide, select Display & sounds, Video options and then TV Resolution.

If you are required to complete these steps on every boot-up, you will want to change your TV connection to HDMI as shown in step 3 in the next section, "Your screen is blank and you use an AVR in your set-up". For more information, see How to adjust
the display settings on your Xbox One console."

EggsBoxJuan · Oct 22, 2018

display resolution

Hi, try resetting the display settings on the Xbox and then go into the display options and try to set things up again.

support.xbox.com/.../tv-or-monitor-screen-is-blank-while-connected

1.If there's a disc in the Xbox One console, eject it.

2.On the console, press and hold the Xbox button for five seconds to turn off the console.

3.Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second
beep occurs.

Note This will boot your console in low resolution mode (640 × 480). To reset this setting, go to Settings in the guide, select Display & sounds, Video options, and then TV Resolution.

If that doesn't help then check the TV picture settings aren't set to Zoom or something that may be enlarging the display input.

WPAK · Oct 22, 2018

Hi there,

have you tried to do the Factory Reset option, which as far as I know is an option on the trouble shoot page to see if that solves anything.

Let us know the results

Frizio I iB · Oct 22, 2018

Hey there

Best solution is to factory reset the console! cause seems that something is stuck in your console booting files!

Saeleth · Nov 3, 2018

This has been going on for MONTHS? Contact MS and setup a repair ticket, it could be hdd related but honestly there are a number of things that could be causing this.

Saeleth

This has been going on for MONTHS? Contact MS and setup a repair ticket, it could be hdd related but honestly there are a number of things that could be causing this.

Frizio I iB

Hey there

Best solution is to factory reset the console! cause seems that something is stuck in your console booting files!

WPAK

Hi there,

have you tried to do the Factory Reset option, which as far as I know is an option on the trouble shoot page to see if that solves anything.

Let us know the results

callum2706

Follow these steps exactly, will force reset our display settings. Good luck.

Reset your display settings. Here's how:

If there's a disc in the Xbox One console, eject it.

On the console, press and hold the Xbox button
for five seconds to turn off the console.

Press and hold the Xbox button
and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second beep occurs.
Note This will boot your console in low resolution mode (640 × 480). To reset this setting, go to
System > Settings in the guide, select
Display & sounds, Video options, and then TV Resolution.

I've tried doing these exact steps and my Xbox just fails the reset by powering up twice then instantly following with a power down.

RobertBuckalew

this will boot it to a kind of safe mod , low res ...usually for a blank screen but you could try it...

1.If there's a disc in the Xbox One console, eject it.

2.On the console, press and hold the Xbox button for five seconds to turn off the console.

3.Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second
beep occurs.

Note This will boot your console in low resolution mode (640 × 480). To reset this setting, go to Settings in the guide, select Display & sounds, Video options, and then TV Resolution.

4.If you are required to complete these steps on every boot-up, you will want to change your TV connection to HDMI as shown in step 3 in the next section, "Your screen is blank and you use an AVR in your setup." For more information, see How to adjust the
display settings on your Xbox One console.

Xbox one beep twice and complete set up problem