Xbox is now not turning on

Hi there,

I had a scare like that, during a power outage a few months ago. The way I fixed it, was to unplug the console from the mains, remove the power cable from your console for a minute or two (to help dissipate any remaining power), and to reconnect > try and
power the console on again.

Feel free to reply, if this doesn't work out for you, and the community will do its best to help. Hope you get back up and running!

Best,

L

Turned on TV. xbox wanted to do an update (approx 521mb). Xbox went through the update process and when it rebooted it would not turn on. When I press the on botton, you hear a faint noise and power brick is yellow.

I did a factory reset by holding down the bottom on the side and dvd eject while tapping the power botton. Xbox turns on, power brick is green and xbox reboots and I reset everything. Then xbox says it needs to do an update and after the update completes
it will not boot

seems like it has something to do with the update?

This forum answer talks about several issues you might be experiencing due to the Xbox failing to update. There is also a link directing you on how to do an offline update in case you need to safely do it this way.

What does it mean when your touch power button has a blinking red light on start up? But never starts... xbox 360 will not power on and i feel i tries everything. All the cords are secure, i pulled out the hardware made sure it was dust free. The power brick
is solid orange light that goes green when you try to start the console but goes back orange cause the console turns off after 10 blinking red lights and never powers up at all. What should I do????

Can you give us some more info... What happens when you power it on?