XBOX does not show picture on TV

Hello guys

I have just got my Xbox 360 from laser cleanup and everything works like it should, but i have one issue. When i connect to my Pioneer VSX 828 receiver, image does not show but sound plays on 5.1 system. I have put XBOX on AV Game input channel, it shows on
LED screen on receiver that it receives HDMI signal by showing H (A is analog, D is for optical i think) so there is no problem there.

Tv is connected via HDMI with receiver main and only HDMI output and it functions normally since i play movies via ChromeCast but i use BD input channel for ChromeCast. In corner it shows 1080p@60hz MHL HDMI when i play movies via chrome. When i switch to Game
input channel, it shows No signal for 2,3 secs (it is normal for all inputs until it recognizes the device ) but it changes to the black screen with same corner notification like chrome cast (1080p@60hz etc) . So it recognizes the XBOX but it does show the
image.

So i changed the Game input to BD input where i play movies from chromecast to see if it works, but when i hook up xbox, it gives me only no singal for 2,3 seconds and then black screen with corner notification (1080p blah blah) with surround sound working.

Next step i took is to connect directly to TV and it shows XBOX image and sound, but sound comes from TV speakers. So i thought : It is either cable, receiver or xbox.

I swapped the cables, chrome cast works but xbox still no image on receiver. I have gone to receiver settings but i did not found anything there that could solve the problem (like HDMI settings etc). So i went to xbox and i have found on google that it this
problem happens to most users and to solve it is to either enable Display discovery (i dont know the exact name) and that was already on or reset Display settings (but current settings are same as chrome cast and that was defaults setting when i bought xbox
from my friend and everything worked). I did display settings reset by holding Y and RT keys but no luck and i tried like 3,4 times. I also turned off display discovery off, waited for restart and turned on again. Nothing.

I also reset to factory settings, still nothing and also i went to display settings and changed to automatic resolution and i think it tested if tv works with 50hz, image looked ok and then it auto revert to 60hz, but i kept on auto.
Tried again but still same problem.

So what i have to do ? I wanna play on my receiver because it worked last time i played so hooking up direct to TV is no solution for me.

Thanks

:)

 

TV picture will not show up during set-up

During the TV setup part, the live TV picture does not show up. It constantly changes from "looking for your TV picture..." to "let's watch TV" every five seconds. I've done the troubleshooting using this link Troubleshoot Video Performance | Xbox One Live TV and
still nothing is working. Any help would be appreciated.

 

No images on my TV

if that dose not work, have you tried puting your laptop or an HDMI device in to the tv (to see if it dose the same thing) if it dose not show a picture you might have to service your tv

 

Hi there FairestPrawn722, thanks for reaching out.

If your
Xbox 360 console display is blank, please make sure to try all the steps presented in that guide to see if they can help out with this issue you're experiencing.

 

I did all that + more than that.

 

Hi! What you have to do is leave your Xbox for about a week or so, and then air clean it with one of those dust destroyers and it should start up again. If that does not happen, you should try to cold restart it and then do it.

 

Thanks for trying that. In this case if you're still experiencing trouble using your Xbox 360 console with that specific receiver, we recommend reaching out to the manufacturer, Pioneer via their

contact form as they may be able to offer further clarification on this.