Xbox controllers won’t sync to Xbox after Xbox has been unplugged

Helio, there.

You should try this:

Plug your control to xbox console vía USB cable > Xbox button menu > configuration > devices and conections > accessories > ... > firmware version > continúe > try nos > ok.

Whenever my controller has trouble connecting to an xbox, I use the plug and play cable. It will automatically sync your controller because it is plugged into your xbox and once that is done, unplugging it should leave it synced

my controller stopped working about a month after i got xbox one. was able to turn it on but not sync. unplugged xbox from power source and worked fine after that

Hello!

Thanks for reaching out to us here on the forums with this situation. I understand you're trying to connect an Xbox One Wireless Controller to a Windows 10 PC but the sync button on the console is broken is that correct? If that's the case you can set up
the controller with a USB cable and us it Wired. To continue wirelessly you could get an Xbox One Wireless Controller Adapter for Window 10 and then connect the controller with the USB and see if it stays synced after you unplug it. Asides from that replacing
the controller would most likely be your best bet. You can always sync the controller to an Xbox One Console also by using a USB and then unplugging it.

Have you also tried re-syncing the controller to the Xbox by plugging it in via a USB cable to the Xbox? I do this method to re-sync my controller to the Xbox and it works fine for me. Make sure the controller is off, plug it into the Xbox, then turn it
on. It will flash a few times and will then be synced and you can unplug it.