Xbox Controller Button Mapping

The paddles on the Elite controller can only be mapped through the Xbox Accessories app on the Xbox One or Windows 10, otherwise they default to ABXY. They are mapped through the controller itself, you press a paddle on the controller, the controller then
sends the mapped command to the PC/Console. Thus they can only be mapped to duplicate other buttons on the controller and cannot be mapped to commands that are "outside" of the regular Xbox Controller inputs.

Basically they aren't an extra 4 buttons, rather an alternative 4 buttons.

Also, if they are not responding at all, try double tapping the sync button on the top of the controller. When turning the paddles off, you get 4 short bursts of vibration, when turning the paddles on, you get one longer burst of vibration.

I believe you can also set this within the Controller App for button mapping. It might be worth setting the game to default and trying to make the change in the Xbox controller button mapping app?

HI,

Thanks for posting your question here on the forums. I think you are talking about the Xbox adaptive controller. If that is the case you can absolutely button map all buttons. Here is a link on button mapping for the adaptive controller.

https://support.xbox.com/en-US/xbox...e-adaptive-controller-in-xbox-accessories-app

Hey there J K Twinkle!

Sorry to hear you are unable to map the Triggers to the A & B buttons. I did attempt to map my Adaptive controller and was able to do this through the Xbox accessories app.

Go ahead and take a look at the following support page for help on Mapping your Xbox One adaptive.

• Customize the Xbox Adaptive Controller in the Xbox Accessories app

Once you are on the Button Mapping screen you can select the A button and you should see the options to map it to a specific function, in this case you would be looking for the Left Trigger. Same thing with the B button you will map that one to the Left
Trigger.

Give this a try and let us know if it has helped.

Hi! I'm Luis, a fellow Xbox Gamer . Thanks for reaching us out here.

Have you double checked your controller´s butoon mapping settings?

Press the Xbox button  to open the guide.

Under Profile & system, select Settings.

Under Devices & connections, select Accessories.

On the Xbox Wireless Controller screen, select Configure.

Carefully review the current mapping for each of the buttons on your controller. You can also select Restore to default to set the controller back to its original button mapping.