Xbox black screen. help!

Ok please help me! When I turn my Xbox one on it will pop up the green start screen. Which is good so far because I've been restarting it. When it's done it will pop up "Hi Jacob" just like usual. But, after that it goes straight to a black screen. Like
I lost connection. But I didn't because if I hold down the Xbox button it will pop up the turn off console and turn off controller option. It will also respond when I say "Xbox" to my Kinect. But, still black screen. I don't know how to fix it and have tried
everything I know. It'd be great to get this fixed before my night of playing with friends. Thanks.

:)

 

nothing happens after green xbox screen ,just a black screen .need help?

nothing happens after green xbox screen ,just a black screen .need help?

 

Xbox one

I was trying to get my xbox one to 1080p then it went all black screen and I turned it off and back on it's still black screen can someone help me

 

Try all these and see , if you haven't already...especially the one that boots it up in "low res"...

Confirm that both your TV and Xbox One console are turned on.

•Check that your TV is set to the correct input signal (HDMI).

•Check that the HDMI cable connection to your console is secure.

•Check that the HDMI cable connection to your TV is secure.

•Check that the HDMI cable is connected to the "out to TV" port on the console.

•Perform a cold boot on your Xbox One console by holding the power button on the front of the console for approximately 10 seconds, and then turn it on again.

•Reset your display settings. Here's how: 1.If there's a disc in the Xbox One console, eject it.

2.On the console, press and hold the Xbox button for five seconds to turn off the console.

3.Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second
beep occurs.

Note This will boot your console in low resolution mode (640 × 480). To reset this setting, go to Settings in the guide, select Display & sounds, Video options, and then TV Resolution.

4.If you are required to complete these steps on every boot-up, you will want to change your TV connection to HDMI as shown in step 3 in the next section, "Your screen is blank and you use an AVR in your setup." For more information, see How to adjust the
display settings on your Xbox One console.

•Try plugging the HDMI cable into a different HDMI port on your TV.

•Try using a different HDMI cable to connect your console to your TV.

•Try connecting your console to a different TV.