Xbox 360 won't turn on but makes still makes noises.

Hello @IanCalder1!

With such issues, I would suggest preforming an offline system update. You can update your console using the Xbox Start-up Trouble-shooter. To bring up the Xbox Start-up Trouble-shooter, follow these steps:

1. Power off your console, and then unplug the mains lead to ensure that the console is completely powered off.
   
2. Wait 30 seconds, and then plug the mains lead back in.
   
3. Press and hold the Pair button (located on the left side of the console) and the Eject button (located on the front of the console), and then press the Xbox button on the console.
   
   Note The Xbox Series S and the Xbox One S All-Digital Edition do not have Eject buttons. You can bring up the Xbox Start-up Trouble-shooter on these consoles by holding only the Pair button (steps 3 & 4) and then pressing the Xbox button.
   
4. Continue holding the Pair and Eject buttons for 10-15 seconds.
   
5. Listen for two “power-up” tones a couple of seconds apart. You can release the Pair and Eject buttons after the second power-up tone.
   
6. The console should power up and take you directly to the Xbox Start-up Trouble-shooter.
   
7. Plug the USB flash drive with the Offline System Update files into a USB port on your Xbox console. When the flash drive is inserted, the Offline system update option on the Xbox Start-up Trouble-shooter becomes active. Use the D-pad and A button on your controller to select Offline system update to initiate the update using the files saved on your flash drive.
   

When the update is complete, the console will restart and you should be returned to the Home screen. If this happens, your console is now up to date! You can remove the USB drive from your console.

If the update is not successful, go to the following section: What to do if the offline system update is not successful.

However, If the issue persist, it could be a hardware/internal issue which means that your console needs to be serviced. You can request a repair order for it here.

Make sure to keep us updated!

I hope this helps you out

Hello, how are you? My name is Mateus. I'm an Independent Advisor and I'll be glad to help you today.

First, welcome to the Xbox community.

We appreciate your coming to the Xbox community, and we're sorry you're having this issue. Based on what you've told us, I recommend you try the solution below.

Step 1. Press and hold the Xbox button on the console for at least 10 seconds to open the Power center.

Step 2. Then unplug the power supply from your console and wait for 3 minutes.

Step 3. Plug the power supply back into the Xbox console.

Step 4. Press the Xbox button on the console to turn it on again.

- If the above solution does not work, try testing the console on another power outlet.

*Thank you in advance for contacting us, I hope this can help you.

Sounds like the vent cover over the hard drive. Mine rattled and made a vibrating noise in the past. I finally took it off the side. You should try that and see if the noise continues.

I have the older white pro console. I think the power supply is done because the light keeps blinking and it's making a clicking noise. The xbox won't even turn on

Seems like a hardware issue with your console

To get your console serviced:
https://support.xbox.com/en-US/my-account/warranty-and-service/getting-your-product-serviced