Xbox 360 S Not giving display

GrandWarrior58 · Jul 4, 2018

Hi ! I have an Xbox 360S without warranty. Its not that used and used to work fine till i opened it today and its not giving display. The side line of Xbox 360 is not appearing which showed that the console is connected and is getting on. I have tried checking
my HDMI cable and also tried to reset display settings but it was not possible because xbox controller not finding the console. I also tried to start the XBOX with Avi cable still no response. Any Help?

:)

EggsBoxJuan · Jul 4, 2018

Xbox hdmi not working, AV cables do!

If you have the S or E model Xbox 360 there is an alternate way to reset the display settings.

.

Xbox 360 E or Xbox 360 S console: To reset display setting on these console models, you can also just turn off the console and then hold the power button on the front of the console down for about 10 seconds. (The lights will flash several times.)

.

weaponx_uk2003 · Jul 4, 2018

Issue with Pioneer Amp

i have switch the cables around with my xbox 360 and my xbox one. it still can some times take a minute or more to give me a display on my tv via my amp

WPAK · Jul 5, 2018

Hi there,

please see this link for all the steps to try and get your issue resolved: Xbox Blank Screen | Xbox 360 Monitor Issues - Xbox.com

If none of the steps work, then it seems that it could be a hardware failure, depending on the type of console it can still be repaired. See the same link in case you need the information on how to request a repair

WPAK

Hi there,

please see this link for all the steps to try and get your issue resolved: https://support.xbox.com/en-US/xbox-360/console/tv-or-monitor-screen-is-blank-while-connected

If none of the steps work, then it seems that it could be a hardware failure, depending on the type of console it can still be repaired. See the same link in case you need the information on how to request a repair

EggsBoxJuan

Xbox 360 E or Xbox 360 S console: To reset display setting on these console models, you can also just turn off the console and then hold the power button on the front of the console down for about 10 seconds. (The lights will flash several times.)

.

Could you give that try please.

EggsBoxJuan

If you have the S or E model Xbox 360 there is an alternate way to reset the display settings.

.

Xbox 360 E or Xbox 360 S console: To reset display setting on these console models, you can also just turn off the console and then hold the power button on the front of the console down for about 10 seconds. (The lights will flash several times.)

.

XBF Houmaidi O

Hello @LawsonDR!

With issues like these, we recommend checking Troubleshoot Xbox 360 display problems | Xbox Support and Connect your Xbox 360 S or original Xbox 360 to a TV | Xbox Support pages as they contain some solution to the issue.

Cap Gustavo

Hi, make sure you connect the cables well to both the console and the TV.

As well as being in the correct mode on the TV that the Xbox displays.

What is your Xbox? (360, One, S or X)

Xbox 360 S Not giving display