xbox 1 x error e105 slugish gaming stopped installation

Hi EricT6

Try the different steps below on at a time to see if one resolves you issue

1. Restart your console

Press the Xbox button to open the guide. Pressing the Xbox button will open the guide from any other screen on the console.
Select Settings.
Select Restart console.
Select Yes to confirm.
If you’re unable to access the guide or the console seems frozen, press and hold the Xbox button on the console for about 10 seconds until the console turns off. After the console shuts down, touch the Xbox button on the console again to restart.

2. Power cycle the console
Turn off your console by holding the Xboxbutton for roughly 10 seconds. The console will turn off.
Turn your console back on by pressing the Xboxbutton on the console or the Xbox button on your controller. If you don’t see the green boot-up animation when the console restarts, repeat these steps. Make sure that you hold the power button until the console
completely shuts down.

3. Disconnect and reconnect your console’s power cable
Turn off the Xbox One console by pressing the Xbox button on the front of the console for about 10 seconds until it shuts down completely.
Unplug the console’s power cable. Wait 10 seconds. Be sure to wait 10 seconds. This step resets the power supply.
Plug the console power cable back in.
Press the Xbox button on your console to turn on the Xbox One
4. Restore your console to factory defaults
If resetting the console doesn’t correct Xbox error e105, you can use Xbox Startup Troubleshooter to restore it completely to factory settings. This will however erase all accounts, saved games, settings, and home Xbox associations. Anything not synchronized
with Xbox Live will be lost.
Note: You should only use this option as a last resort.

Power off your console, and then unplug the power cord to ensure that the console is completely powered off.
Wait 30 seconds, then plug the power cord back in.
Press and hold the BIND button (located on the left side of the console) and the EJECT button (located on the front of the console), and then press the Xbox button on the console.
Continue holding the BIND and EJECT buttons for 10-15 seconds.
Listen for two “power-up” tones a couple of seconds apart. You can release the BIND and EJECT buttons after the second power-up tone.
The console should power up and take you directly to the Xbox Startup Troubleshooter.
To reset your console from the Xbox Startup Troubleshooter, use the D-pad and A button on your controller to select Reset this Xbox.
When prompted, select Remove everything.
Your console should function correctly now.

If that didn’t help, then your console needs to be repaired to correct Xbox error e105, so you can submit a repair request to Xbox Device Support.

Also if doing a Factory Reset does not work, then check the Gamestop for return, they do offer a return policy for buying refurb console, you might have the option to do a exchange

1. Restart your console
2. Power cycle the console
3. Disconnect and reconnect your console’s power cable
4. Restore your console to factory defaults

@Tomesso:

It all started with my first One X stuttering while booting up, ended up with corrupted save games and Error Code E105.

Since then i got consoles which:

- Did the same

- had a rattling fan

- didn't turn on after one day

- had heavy, really heavy coil whine in every game

- or gave me Installation Errors (Maybe that would had ended up with an E105 again..)

My Box now seems fine so far, but i can't play anything offline without this Homeconsole setting

here are some solutions for error e105 that can help you

https://windowsreport.com/xbox-error-e105-fix/