X box won't turn on and says no signal on the TV

Hello there @junaidaamir, I hope everything is going well!

Thank you for reaching Microsoft Xbox Forum support. I am sorry to know about the console situation; However, I believe your console might need just a system refresh to perform the system update successfully. I would like you to go through the following steps to perform a quick power cycle.

I invite you to perform a quick power cycle by turning off the console and then unplugging all the cables. After 2 to 3 minutes, re-plug them back again, then restart your console.

If you are still getting the same issue, I would like you please to kindly follow the instructions below to physically reset your console:

- Turn off the console unplug all the cables then re-plug them back again.

- Since the console is an all digital one, click on the "Bind" button, after 10 seconds click the home "X" button just once without letting go of the button. Throughout the whole process you will hear two beep sounds and end up with a troubleshooting page. On your screen. You will need to select the "Reset this Xbox" option and choose "Reset and keep my games and apps".

Note =>The "Reset and Keep my Games and Apps" option will not cause losing your games, but please be aware that you need to be completely aware of the email address as well as the password of your account before going for it because it will require you to sign in to the account.

In case all previously mentioned troubleshooting steps weren't helpful, the next solution would be to perform an offline system update. In the link below you will be directed to everything you need to know about the offline update and how to run it.

The link: Perform an offline system update | Xbox Support

I wish you a lovely day, and I hope this helps you out! All the best!

Kind Regards

Stay safe, and happy gaming!

Hi,

yes i was able to find that setting for the TV and turnet it OFF. It say after 10minutes turn TV OFF if no signal is detected.

i called Vizio and they send a tech to replace the TV board but is still turning OFF after 19minues most of the time.

it is weird that the timing is almost the same. That why i think it have to be the X Box.

i am not sure what to try next.

Hmm, you keep saying it won't turn on, but then what you're describing is that it will turn on, you just aren't seeing a signal on the TV.

Is the actual core of the issue:

A. It won't power on?

or

B. It's not giving you a signal, but it's on?

This could mean something very different for troubleshooting. c

Hi, Ray. My name is Ron, I'm an independent advisor. I will be more than happy to help you.

Please try the following steps one at a time to resolve the issue:

Confirm that both your TV and Xbox One console are turned on.

Check that your TV is set to the correct input signal (HDMI).

Check that the HDMI cable connections to your console and to your TV are secure.

Check that the HDMI cable is connected to the "out to TV" port on the console.

Try plugging the HDMI cable into a different HDMI port on your TV.

Try using a different HDMI cable to connect your console to your TV.

Try connecting your console to a different TV.

Power cycle your Xbox One: Press and hold the Xbox button  for 10 seconds to turn off the console, and then turn it on again.

I have gone thru the tv setup, and it detects the tv and cable box no problem.

I have also tried leaving the directv box on and turning the xbox off and when i turn it back on it again says it lost connection.

As soon as i press the off button on the directv and then back on, the xbox gets the signal.

Anything else?