Why won’t my Xbox One X display on my screen?

Hi Joel! I'm Rostom, an Independent Advisor. I will be glad to help you here.

Please make sure you have tried all the steps suggested on the link below along with resetting your console's display settings.
https://support.xbox.com/en-US/help/hardware-ne....

I just want to confirm as well if your console turns on correctly? It doesn't shutdown unexpectedly?

I have the same problem - have you resolved yours. I have tried all of the above and no success.

Hello. I'm Arturo, and I'll be glad to provide assistance with your inquiry today.

I'm sorry to hear that your Xbox console is not showing up video signal on your TV.

Not only that, but I would like to ask if you tried:

A. Start your Xbox in the low resolution mode.

“If there's a disc in the console, eject it.
On the console, press and hold the Power button on the front of the console for 10 seconds to turn off the console.

Press and hold the Power button and the Eject button until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep.

Don’t let go until you hear the second beep or see the console start up in low resolution mode (the Xbox startup screen will appear slightly pixelated).

Note: If you have an Xbox Series S or Xbox One S All-Digital Edition, press and hold the Xbox button and the Pair button instead, as your console doesn’t have an Eject button.

In either case, this will start up your console in low resolution mode (640 × 480).”

After doing this procedure, you can change the resolution again.

Reference link:
https://support.xbox.com/help/hardw...tv-or-monitor-screen-is-blank-while-connected > Your screen is blank after you turn on your console > reset your display settings.

B. Connect your console to another HDMI port on your TV.

C. Connect your console to another TV in your house.

I'll look forward to hearing from you.

Kind regards,

Arturo.

Please try again after we power cycle your console. Press and hold Xbox's power button for 10 sec or until it's turned off. Unplug the power supply and wait for about a minute to plug it back in to turn your console back on.

So with the display gone it does power down after 30 seconds or so but I’ve tried holding power and eject down together but I’m never able to get the second beep