VPN on my router nat is strict over the vpn and i cant connect to call of duty ghosts ...

Hello VPN on my router nat is strict over the vpn and i cant connect to call of duty ghosts multiplayer can anyone please help?

:)

 

Need Help Setting Up VPN

I recently purchased a VPN and set it all up, it works fine aside from my NAT type being strict and It should be able to at least get to moderate. I've tried opening The VPN ports as well as xbox ports 3074, 4500, 3544 on my router as well as the VPN and
still nothing.

Managed to get it to moderate for about 2 minutes before going back to strict. Anyone know of any specific ports I should open or tricks I could do to at least get my NAT on moderate?

Sincere Regards

 

How to Setup a VPN on your Xbox Console

There are many benefits to routing your xbox IP through a VPN connection. This ranges from utilizing exclusive American content, to hiding your IP from DDoSers, or even hiding your location from Doxers. This tutorial will show you a loophole that allows you to get around/avoid these hassles. Let us begin.

Prerequisites:

WiFi Connection
Laptop with LAN port
VPN (Virtual Private Network)
Ethernet Cable

VPN's:

IPVanish
PureVPN
ExpressVPN

This tutorial was done using IPvanish.

Setup VPN on Xbox
One of the methods of setting up Xbox One VPN is by tunneling your service via router and then connecting your gaming console and other devices to the router. Note that the setup may vary according to the router you use and the instructions provided by the VPN provider.

- Use the following steps to configure a VPN service on your router:
- You need an Ethernet cable and connect your modem to the WAN port in the router.
- Open your Router’s Control Panel – accessible from your system control panel.
- Go to the ‘Basic Setup’ / ‘Network’ / ‘Basic’ tab in your router control panel (where you can configure WAN or Internet settings).
- Enter the setup details provided by your VPN provider (username, password, gateway, subnet mask, etc.).
- Select the appropriate protocol settings and the change the ‘Connection Type’ based on your router and VPN providers instructions (usually to PPTP, but it depends).
- Select the appropriate DCHP settings depending on the requirements by your VPN provider.
- Click the Apply Settings / Save / Connect button and you are done.

Now you can connect your Xbox to the router either through Wi-Fi or through Ethernet cable and can enjoy using VPN on your Xbox 360 or Xbox One.

 

As far as I know using a VPN is not allowed by the rules of xbox live

If your NAT is set to strict you need to open ports instead

Used ports by xbox

support.xbox.com/.../network-ports-used-xbox-live

Port forwarding info/guides

Setup a port forward in your router to allow incoming connections for multiplayer games, VOIP, DVR, and security cameras.