Using a second controller (w/ 3.5mm) to connect speakers

connect a 3.5mm cable to the controller and the input section of the soundcard on pc to pass through sound the pc speakers. or get a speaker setup for your pc with multiple inputs so you can then select different sources and use optical.

Thank you for contact us! I'm Anderson, an Independent Consultant and a Microsoft user like you.

Good evening

To get Xbox audio through your Logitech Z200 speakers, which are connected to your AOC Gaming Q27G2E monitor via a 3.5mm jack, you'll need to make sure the audio is properly routed from your Xbox Series X to the monitor.

Check your monitor's audio input: First, make sure that your monitor (AOC Gaming Q27G2E) is capable of receiving audio through its 3.5mm audio input. Typically, monitors that have built-in speakers or an audio output port (3.5mm jack) also have an audio input option.

Connect the Xbox to the monitor: Use an HDMI cable to connect your Xbox Series X to the AOC Gaming Q27G2E monitor. This will handle the video signal.

Connect the speakers to the monitor: Plug the 3.5mm jack of your Logitech Z200 speakers into the audio output port on your monitor. This port should be labeled as an audio output or a headphone icon.

Configure Xbox audio settings: Once the physical connections are set up, you need to configure the audio settings on your Xbox Series X:

a. Press the Xbox button on your controller to open the guide.

b. Navigate to the System tab (gear icon) using the controller.

c. Go to Settings > General > Volume & audio output.

d. Under the "Speaker audio" section, select "HDMI audio."

e. Make sure to set "Headset audio" to "Off" or "Do nothing" since you're using the external speakers through the monitor.

Adjust the monitor's audio settings: On your AOC Gaming Q27G2E monitor, locate the on-screen display (OSD) menu button. This button may be labeled as "Menu" or have an icon of a monitor with buttons. Access the OSD menu and navigate to the audio settings. Ensure that the audio input is set to "3.5mm" or "Analog" to receive audio from the Xbox connected via HDMI.

Test the audio: After making these adjustments, play a game or video on your Xbox Series X to test the audio output through the Logitech Z200 speakers connected to your monitor.

If everything is set up correctly, you should now be able to hear the audio from your Xbox Series X through your Logitech Z200 speakers connected to your AOC Gaming Q27G2E monitor via the 3.5mm jack. Adjust the volume using the monitor's built-in controls or the volume control on the speakers themselves.

The speaker it's too big and far the Controller, then i can't put a > (3.5mm Jack)

u can connect speakers to the monitor if it has a 2.5mm or 3.5mm auxiliary jack

Buy speakers and if the monitor has 3.5mm jack you can use headsets or speakers.