Updates will not run

done the hard reset and normal reset still running bad

Hey there ChefRedneck32.

It sounds like it may be an issue with your network connection, can you try resetting your network by unplugging your network hardware for a minute and reconnecting? Let us know if that helps.

A power cycle could fix the issue.

I've done the reset hard reset

Hi ChargerBrian,

Thanks for reaching out to us today. I'm sorry to hear about the current update issue.

To resolve this problem, try the following steps provided by our article for this specific

'Error 8007-000F "Can't process the update" occurs when downloading an update on Xbox 360':

1. Turn off your console.
2. Remove all storage devices, including any USB flash drives, external hard drives, or the internal hard drive on the Xbox 360 E console or the Xbox 360 S console.
   
   Learn how to remove the hard drive.
3. Add your primary storage device; for example, the hard drive.
4. Turn on the console.
5. Try updating the console again.

Still receiving the error message?

• If your Xbox 360 console has an internal memory module: Try installing the update to a different storage device, or go to the
  Online Service Center to request a console repair.
  
  Examples of internal memory modules include:
  • Xbox 360 E 4GB
  • Xbox 360 S 4GB
  • Original Xbox 360 Arcade
• If your Xbox 360 console has an attached hard disk drive (HDD): See
  Add or remove an Xbox 360 hard drive to learn how to remove the HDD so that you can use a different storage device when you install the update. (HDDs can range in size from 20 GB to 320 GB.)

If the previous solutions didn't resolve the problem, your console needs to be repaired. See

Getting your Xbox console or Kinect sensor serviced.