Ubiquiti: Wireless Security

Discus and support Ubiquiti: Wireless Security in XboX Networking Hardware to solve the problem; Ubiquiti (Routers): Wireless Security Login Information Gateway: 192.168.1.1 Username: ubnt Password: ubnt How To Find Wireless Passphrase... Discussion in 'XboX Networking Hardware' started by XB1R Hydros, Jul 18, 2014.

  1. XB1R Hydros
    XB1R Hydros Guest

    Ubiquiti: Wireless Security


    Ubiquiti (Routers): Wireless Security
    Login Information



    • Gateway: 192.168.1.1
    • Username: ubnt
    • Password: ubnt
    How To Find Wireless Passphrase (WPA/WEP)

    There is no default wireless passphrase for this device.



    Changing Wireless Security Type/ Disabling Wireless Security

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type in the gateway address, 192.168.1.1 into the web address bar, hit enter.
    4. This will take you to a login page, type ubnt for both username and password.
    5. Once of the main page, select the Wireless tab.
    6. On the Wireless page, scroll down to the “Wireless Security” section.
    7. Next to the Security dropdown, select the desired security type.
    8. Enter a security key or password.
    9. Select Save/Apply to save the changes.

    :)
     
    XB1R Hydros, Jul 18, 2014
    #1
  2. FatDadNZ
    FatDadNZ Guest
    Original xbox 360 with wireless n adapter will only connect to 802.11g not 802.11n

    I've hunted high and low for a solution online but nothing has worked. I have an original xbox with a wireless n adapter. My wireless network comes from a Ubiquiti Nanostation Loco M2 (2.4Ghz, B/G/N) using WPA2/AES security via a Belkin F9K1002 router. All
    of my other 802.11n devices connect to the network in 802.11n but my xbox will only ever connect to 802.11g.

    I've tried the following:

    * Restoring network settings to factory on the xbox

    * Restoring router and AP settings to factory

    * Removing all security

    * Can't set to 802.11n only on the Ubiquiti (it only allows mixed B/G/N) to test if xbox connects to 802.11n then

    Please help as I've completely run out of ideas.
     
    FatDadNZ, Jul 18, 2014
    #2
  3. XB1R Hydros
    XB1R Hydros Guest
    Ubiquiti: Change Wireless Band

    Ubiquiti (Routers): Change Wireless Band (width)
    Login Information



    • Gateway: 192.168.1.1
    • Username: ubnt
    • Password: ubnt
    Change Wireless Band (Width)

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type in the gateway address, 192.168.1.1 into the web address bar, hit enter.
    4. This will take you to a login page, type ubnt for both username and password.
    5. Once of the main page, select the Wireless tab.
    6. On the Wireless page, scroll down to the “Basic Wireless Settings” section.
    7. Next to the Channel Width dropdown, select “20 MHz”.
    8. Select Save/Apply to save the changes.
     
    XB1R Hydros, Jul 18, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Ubiquiti: Wireless Security