Ubiquiti: DMZ

Ubiquiti (Routers): DMZ
Login Information

• Gateway: 192.168.1.1
• Username: ubnt
• Password: ubnt

DMZ

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type in the gateway address, 192.168.1.1 into the web address bar, hit enter.
   
4. This will take you to a login page, type ubnt for both username and password.
   
5. Once of the main page, select the Network tab.
6. On the Network page, under the “LAN Network Settings” check the Enable DMZ box.
   
7. Type in the DMZ IP address for the Xbox.
8. Select Save/Apply to save the changes.

Disable DMZ

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type in the gateway address, 192.168.1.1 into the web address bar, hit enter.
   
4. This will take you to a login page, type ubnt for both username and password.
   
5. Once of the main page, select the Network tab.
6. On the Network page, under the “LAN Network Settings” uncheck the Enable DMZ box.
   
7. Select Save/Apply to save the changes.

:)

 

Ubiquiti: Known Issues

Ubiquiti (Routers): Known Issues
Known Issues

There are no currently known issues with this device.

 

Ubiquiti Ubiquiti Air Router: Strict nat since moved to WISP

Ubiquiti (Routers) Ubiquiti Air Router: Strict nat since moved to WISP
Check this link for a possible solution:
https://support.xbox.com/en-US/xbox-one/networking/nat-error-solution