Ubiquiti: Change Wireless Channel

Discus and support Ubiquiti: Change Wireless Channel in XboX Networking Hardware to solve the problem; Ubiquiti (Routers): Change Wireless Channel Login Information Gateway: 192.168.1.1 Username: ubnt Password: ubnt Change Wireless Channel... Discussion in 'XboX Networking Hardware' started by XB1R Hydros, Jul 18, 2014.

  1. XB1R Hydros
    XB1R Hydros Guest

    Ubiquiti: Change Wireless Channel


    Ubiquiti (Routers): Change Wireless Channel
    Login Information



    • Gateway: 192.168.1.1
    • Username: ubnt
    • Password: ubnt
    Change Wireless Channel

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type in the gateway address, 192.168.1.1 into the web address bar, hit enter.
    4. This will take you to a login page, type ubnt for both username and password.
    5. Once of the main page, select the Wireless tab.
    6. On the Wireless page, scroll down to the “Basic Wireless Settings” section.
    7. Next to the Extension Channel dropdown, select the desired channel.
    8. Select Save/Apply to save the changes.

    :)
     
    XB1R Hydros, Jul 18, 2014
    #1
  2. XB1R Hydros
    XB1R Hydros Guest
    Ubiquiti: Change Wireless Band

    Ubiquiti (Routers): Change Wireless Band (width)
    Login Information



    • Gateway: 192.168.1.1
    • Username: ubnt
    • Password: ubnt
    Change Wireless Band (Width)

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type in the gateway address, 192.168.1.1 into the web address bar, hit enter.
    4. This will take you to a login page, type ubnt for both username and password.
    5. Once of the main page, select the Wireless tab.
    6. On the Wireless page, scroll down to the “Basic Wireless Settings” section.
    7. Next to the Channel Width dropdown, select “20 MHz”.
    8. Select Save/Apply to save the changes.
     
    XB1R Hydros, Jul 18, 2014
    #2
  3. XB1R Hydros
    XB1R Hydros Guest
    Ubiquiti: Change Wireless Mode

    Ubiquiti (Routers): Change Wireless Mode
    Login Information



    • Gateway: 192.168.1.1
    • Username: ubnt
    • Password: ubnt
    Change Wireless Mode

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type in the gateway address, 192.168.1.1 into the web address bar, hit enter.
    4. This will take you to a login page, type ubnt for both username and password.
    5. Once of the main page, select the Wireless tab.
    6. On the Wireless page, scroll down to the “Basic Wireless Settings” section.
    7. Next to the IEEE 802.11 Mode dropdown, select “G-Only”.
    8. Select Save/Apply to save the changes.
     
    XB1R Hydros, Jul 18, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Ubiquiti: Change Wireless Channel