Ubiquiti: Change Wireless Band

Ubiquiti (Routers): Change Wireless Band (width)
Login Information

• Gateway: 192.168.1.1
• Username: ubnt
• Password: ubnt

Change Wireless Band (Width)

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type in the gateway address, 192.168.1.1 into the web address bar, hit enter.
   
4. This will take you to a login page, type ubnt for both username and password.
   
5. Once of the main page, select the Wireless tab.
6. On the Wireless page, scroll down to the “Basic Wireless Settings” section.
7. Next to the Channel Width dropdown, select “20 MHz”.
8. Select Save/Apply to save the changes.

:)

 

Starbridge: Change Wireless Band

Starbridge (Modems/Gateways): Change Wireless Band (width)
Change Wireless Band (width)

The default wireless band is 20MHz and cannot be changed.

 

Ubiquiti: Change Wireless Mode

Ubiquiti (Routers): Change Wireless Mode
Login Information

• Gateway: 192.168.1.1
• Username: ubnt
• Password: ubnt

Change Wireless Mode

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type in the gateway address, 192.168.1.1 into the web address bar, hit enter.
   
4. This will take you to a login page, type ubnt for both username and password.
   
5. Once of the main page, select the Wireless tab.
6. On the Wireless page, scroll down to the “Basic Wireless Settings” section.
7. Next to the IEEE 802.11 Mode dropdown, select “G-Only”.
8. Select Save/Apply to save the changes.