Troubleshoot not working

Please don't make Duplicate posts. Check and reply to your original post to stop unnecessary
duplicate answers.

Hi!

Contact with xbox support here

https://beta.support.xbox.com/contact-us

Hi,

What's the issue ???

Regards

According to Startup error solution a Reset of the console is required and the first step listed below is most important. If you need to
bring up the Xbox Startup Troubleshooter again, follow these steps:

1. Power off your console, and then unplug the power cord to ensure that the console is completely powered off.
   
2. Wait 30 seconds, then plug the power cord back in.
3. Press and hold the BIND button (located on the left side of the console) and the
   EJECT button (located on the front of the console), and then press the
   Xbox button on the console.
   Note The Xbox One S All-Digital Edition does not have an
   EJECT button. You can bring up the Xbox Startup Troubleshooter on this console by holding only the
   BIND button (steps 3 & 4) and then pressing the Xbox button
   .
   
4. Continue holding the BIND and EJECT buttons for 10-15 seconds.
   
5. Listen for two “power-up” tones a couple of seconds apart. You can release the
   BIND and EJECT buttons after the second power-up tone.
   
6. The console should power up and take you directly to the Xbox Startup Troubleshooter.
   

To reset your console from the Xbox Startup Troubleshooter, use the D-pad
and A button
on your controller to select Reset this Xbox. When prompted, select
Keep games and apps. This option will reset the OS and delete all potentially corrupted data without deleting your games or apps.

Perhaps maybe look into attaching your xbox to a pc and try it if you have access?