TP-Link: Wireless Security

TP-Link (Modems/Gateways): Wireless Security
TP-Link TD-W8901G

Login Information:

Default Gateway – 192.168.1.1

Username – admin

Password – admin





How To Find Wireless Passphrase (WPA/WEP)

1. Open a web browser and type http://192.168.1.1 into the address and press enter.
   
2. Enter “admin” for both the username and password when prompted.
3. Select Interface setup from the tabs across.
4. Select Wireless from the resulting submenu.
5. The wireless passphrase will be located in the pre-shared key space.

Changing Wireless Security Type/ Disabling Wireless Security

1. Open a web browser and type http://192.168.1.1 into the address and press enter.
   
2. Enter “admin” for both the username and password when prompted.
3. Select Interface setup from the tabs across.
4. Select Wireless from the resulting submenu.
5. Select Disabled from the Authentication Type drop down menu.
6. Click the Save button at the bottom of the screen.

:)

 

TP-Link: Wireless Security

TP-Link (Modems/Gateways): Wireless Security
TP-Link TD-8616



Login Information

Gateway - 192.168.1.1

Username - admin

Password - admin



How To Find Wireless Passphrase (WPA/WEP)



*This device does not have wireless capability*



Changing Wireless Security Type/ Disabling Wireless Security



*This device does not have wireless capability*

 

TP-Link: Wireless Security

TP-Link (Modems/Gateways): Wireless Security
TP-Link TD-W8960N

Login Information

Gateway - 192.168.1.1

Username - admin

Password - admin

How To Find Wireless Passphrase (WPA/WEP)

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the device by entering the default gateway into the address bar of the internet browser (192.168.1.1).
   
4. The device will then prompt you to enter the username and password. The default username and password are "admin" and "admin".
   
5. Select Wireless from the menu on the left.
6. Select Security from the submenu.
7. The Wireless Passphrase will be displayed next to WPA Pre-Shared Key. You may need to click the Click here to display link.
   

Changing Wireless Security Type/ Disabling Wireless Security

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the device by entering the default gateway into the address bar of the internet browser (192.168.1.1).
   
4. The device will then prompt you to enter the username and password. The default username and password are "admin" and "admin".
   
5. Select Wireless from the menu on the left.
6. Select Security from the submenu.
7. The Wireless Security can be disabled by selecting “Open” from the Network Authentication drop down.
   
8. Click the Apply/Save button at the bottom of the page.