TP-Link: UPnP

TP-Link (Modems/Gateways): UPnP
TP-Link TD-W8901G

Login Information:

Default Gateway – 192.168.1.1

Username – admin

Password – admin





UPnP

1. Open a web browser and type http://192.168.1.1 into the address and press enter.
   
2. Enter “admin” for both the username and password when prompted.
3. Select Access Management from the menu at the top.
4. Select UPnP from the resulting submenu.
5. Toggle both UPnP and Auto-config to Activated or Deactivated depending on need.
   
6. Click the Save button at the bottom of the page.

:)

 

TP-Link: UPnP

TP-Link (Modems/Gateways): UPnP
TP-Link TD-W8960N

Login Information

Gateway - 192.168.1.1

Username - admin

Password - admin

UPnP

1. Open a web browser.
2. Log into the device by entering the default gateway into the address bar of the internet browser (192.168.1.1).
   
3. The device will then prompt you to enter the username and password. The default username and password are "admin" and "admin".
   
4. Select Advanced Setup from the menu on the left.
5. Select UPnP from the submenu.
6. Check or un-check the option for UPnP.
7. Click the Save/Apply button.

 

TP-Link: UPnP

TP-Link (Modems/Gateways): UPnP
TP-Link TD-8616



Login Information

Gateway - 192.168.1.1

Username - admin

Password - admin



UPnP

1. Open a web browser.
2. Log into the device by entering the default gateway into the address bar of the internet browser (192.168.1.1).
   
3. The device will then prompt you to enter the username and password. The default username and password are "admin" and "admin".
   
4. Select Access Management from the menu at the top.
5. Select UPnP from the submenu.
6. Select Activated next to UPnP and Auto-configured.
7. Select the Save button.