TP-Link: DMZ

TP-Link (Modems/Gateways): DMZ
TP-Link TD-W8901G

Login Information:

Default Gateway – 192.168.1.1

Username – admin

Password – admin





DMZ

1. Open a web browser and type http://192.168.1.1 into the address and press enter.
   
2. Enter “admin” for both the username and password when prompted.
3. Select Advanced Setup from the menu at the top.
4. Select NAT from the resulting submenu.
5. Select DMZ.
6. Set the DMZ to Enabled and then enter the IP Address of your Xbox console.
7. Click the SAVE button found at the bottom of the screen.

Disable DMZ

1. Open a web browser and type http://192.168.1.1 into the address and press enter.
   
2. Enter “admin” for both the username and password when prompted.
3. Select Advanced Setup from the menu at the top.
4. Select NAT from the resulting submenu.
5. Select DMZ.
6. Set the DMZ to Disabled.
7. Click the SAVE button at the bottom of the screen.

:)

 

TP-Link: DMZ

TP-Link (Modems/Gateways): DMZ
TP-Link TD-8616



Login Information

Gateway - 192.168.1.1

Username - admin

Password - admin



DMZ

1. Open a web browser.
2. Log into the device by entering the default gateway into the address bar of the internet browser (192.168.1.1).
   
3. The device will then prompt you to enter the username and password. The default username and password are "admin" and "admin".
   
4. Select Advanced Setup from the menu at the top.
5. Select NAT from the submenu.
6. Select DMZ from the next submenu.
7. Select Enabled next to DMZ.
8. Enter the IP Address of the Xbox.
9. Select the Save button.

Disable DMZ

1. Open a web browser.
2. Log into the device by entering the default gateway into the address bar of the internet browser (192.168.1.1).
   
3. The device will then prompt you to enter the username and password. The default username and password are "admin" and "admin".
   
4. Select Advanced Setup from the menu at the top.
5. Select NAT from the submenu.
6. Select DMZ from the next submenu.
7. Select Disabled.
8. Click the Save button at the bottom.

 

TP-Link: DMZ

TP-Link (Modems/Gateways): DMZ
TP-Link TD-W8960N

Login Information

Gateway - 192.168.1.1

Username - admin

Password - admin

DMZ

1. Open a web browser.
2. Log into the device by entering the default gateway into the address bar of the internet browser (192.168.1.1).
   
3. The device will then prompt you to enter the username and password. The default username and password are "admin" and "admin".
   
4. Select Advanced Setup from the menu on the left.
5. Select NAT from the submenu.
6. Select DMZ Host from the next submenu.
7. Enter the IP Address of the Xbox.
8. Select the Save/Apply button.

Disable DMZ

1. Open a web browser.
2. Log into the device by entering the default gateway into the address bar of the internet browser (192.168.1.1).
   
3. The device will then prompt you to enter the username and password. The default username and password are "admin" and "admin".
   
4. Select Advanced Setup from the menu on the left.
5. Select NAT from the submenu.
6. Select DMZ Host from the next submenu.
7. Clear the IP Address from the DMZ Host IP Address.
8. Click the Save/Apply button at the bottom.