TP-Link: DHCP Reservation

Discus and support TP-Link: DHCP Reservation in XboX Networking Hardware to solve the problem; TP-Link (Modems/Gateways): DHCP Reservation TP-Link TD-W8901G Login Information: Default Gateway – 192.168.1.1 Username – admin Password – admin... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Mar 15, 2015.

  1. XBR Poseidon
    XBR Poseidon Guest

    TP-Link: DHCP Reservation


    TP-Link (Modems/Gateways): DHCP Reservation
    TP-Link TD-W8901G

    Login Information:

    Default Gateway – 192.168.1.1

    Username – admin

    Password – admin





    DHCP Reservation



    1. Open a web browser and type http://192.168.1.1 into the address and press enter.
    2. Enter “admin” for both the username and password when prompted.
    3. Select Interface Setup from the menu at the top.
    4. Select LAN from the resulting submenu.
    5. In the DHCP Table section select the desired IP Address from the IP Address drop down menu.
    6. Enter the MAC Address of your console in the MAC Address field.
    7. Select Static from the Status drop down.
    8. Click Save at the bottom of the page.

    :)
     
    XBR Poseidon, Mar 15, 2015
    #1
  2. XB1R Apollo
    XB1R Apollo Guest
    TP-Link: DHCP Reservation

    TP-Link (Modems/Gateways): DHCP Reservation
    TP-Link TD-8616



    Login Information

    Gateway - 192.168.1.1

    Username - admin

    Password - admin



    DHCP Reservation



    1. Open a web browser.
    2. Log into the device by entering the default gateway into the address bar of the internet browser (192.168.1.1).
    3. The device will then prompt you to enter the username and password. The default username and password are "admin" and "admin".
    4. Select Interface Setup from the menu at the top.
    5. Select LAN from the submenu.
    6. Under the section titled DHCP Table select the desired IP Address from the dropdown labeled IP Address.
    7. Enter the MAC Address of the Xbox.
    8. Select the Save button.
     
    XB1R Apollo, Mar 15, 2015
    #2
  3. XB1R Apollo
    XB1R Apollo Guest
    TP-Link: DHCP Reservation

    TP-Link (Modems/Gateways): DHCP Reservation
    TP-Link TD-W8960N

    Login Information

    Gateway - 192.168.1.1

    Username - admin

    Password - admin

    DHCP Reservation



    1. Open a web browser.
    2. Log into the device by entering the default gateway into the address bar of the internet browser (192.168.1.1).
    3. The device will then prompt you to enter the username and password. The default username and password are "admin" and "admin".
    4. Select Advanced Setup from the menu on the left.
    5. Select LAN from the submenu.
    6. Click the Add Entries button.
    7. Type the consoles MAC address and desired IP address.
    8. Select the Save/Apply button.
     
    XB1R Apollo, Mar 15, 2015
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

TP-Link: DHCP Reservation