Switching ipv4 to ipv6

Hello, I´m Jamie. an Independent Advisor and a Microsoft user like you.

Have you tried the following link below for help on that:

https://support.xbox.com/en-GB/help/hardware-ne...

Thanks

Jamie

You can only switch to ipv6 only if your internet provider supports ipv6.

VirginMedia (Modems/Gateways): how do i switch from ipv4 to ipv6?
IPv6 support was removed as part of the “upgrade” 🙁

I had the same issue, i have a router thats both ipv4 and ipv6. I went through and changed things over to ipv6 on my router and then changed it on my console, It wouldn’t connect to the internet, so inset it all back to ipv4 and left it. My laptop however
would connect when all switched over to ipv6, so now I’m utilizing both ipv4 for my console, and ipv6 for my laptop.

It might be that your ISP is using IPv6 and tunneling IPv4 via CG-NAT and DS-Lite.

While IPv6 is generally a Good Thing to have (as the Xbox One primarily uses IPv6, and even if you only have IPv4, it will use IPv6 tunneled through IPv4), you might want to check with your ISP if they offer you a "Dual Stack" connection with IPv6 and a
real public IPv4 in parallel.

There really isn't much you can do on the console itself, as it does check automatically what IP protocol your ISP provides, and if it's IPv6, then the console will use IPv6. If it's a Dual Stack, where you have IPv4 natively (not tunneled through IPv6)
and IPv6, then the console will use both, and if it's an IPv4 connection, it'll tunnel IPv6 through IPv4 through Teredo.