Strict NAT, how do i fix this?

So... I have a Huawei Mobile E589(Modem wifi thing, (can have up to 10 units connected). And i can't figure this one out!

I tried different settings, and rebooted and rebooted, activating DMZ(on xbox one IP) won't work either

My E589 seems different from the others i've seen for example some settings is missing.

I don't have "Special applications" as shown here: How to Open the NAT for Xbox on Huawei E589 Mobile WiFi | Mobile Broadband Blog

It's extremely hard to find NAT setup/settings for this one, or do i just suck at this?

I don't have UPnP. (Am i *** here?)

Some settings i have

TAB: WLAN

WLAN Basic Settings

WLAN Advanced Settings

WLAN MAC Settings

WPS Settings

and DHCP

Next TAB: Security

Fire Switch: This page gives information on how to enable firewall filter functions. The IP address filter and WAN port ping functions are only available when the firewall is enabled.

Enable firewall

Enable IP adress filter

LAN-Ip filter: LAN IP Filter List:

[WAN IP Adewss] [WAN Port] [ Protocol] [Status] [Options]

Yes i can setup both "TCP/UCP"

Virtual Server: Virtual Server List

[Name] [WAN Port] [LAN IP Adress] [LAN Port] [Protocol] [Status] [Options]

DMZ Status: If a PC cannot run network applications through the gateway, enable the DMZ function and enter the IP address of the PC below.

Enable or Disable DMZ

And ofc IP...

That's about it!

:)

 

why do i have a strict nat even with upnp enabled and how do i fix it

i have a upnp enabled and still have a strict nat how do i fix this?

 

nat

my nat is strict and i can't change it to open no matter what i do how do i fix it?

 

May you provide us with two additional informations on your issue please?

1. What's your provider and how are you connected to the Internet?

2. Please perform a multiplayer connection test. In the result screen please hold LT, LB, RT and RB simultaneously to start the detailed connection test. Wait for the detailed NAT status and post back the results here.

 

NAT results: The network is behind a gate symmetric NAT solution

I'm entirely connected through wifi, ("Telenor" 4G)

 

Ok I see.

I think there may be only one solution for you to get this working. You listed that you have the possibility to use DMZ on your Huawei. So please try using it. Check the IP of your One in settings / network and enter the IP as DMZ and then try a multiplayer
connection test again.

 

Sorry accidently replied on a different account -.-

Anyway, i will try DMZ, tried it before, maybe did something wrong, will let you know if it works or not!