Status code 200

Hey Newch,

Thank you for reaching out. If you haven't done so already, I'd like for you to try

reinstalling the latest console update by doing the following:

1. Clear the system cache. To do this, see the "Clear the system cache" section above.
   
2. Roll back and then reinstall system updates. To do this:
   1. Press the Guide button
      on your controller.
   2. Go to settings and select System.
   3. Select Storage.
   4. Enter the following button sequence: X, LB, RB, X, LB, RB, X.
      
   5. Select the option to roll back all system updates that are installed. The console will restart automatically and then download the updates again.
      

Hope this helps!

Hi Newch,

I will be closing this thread as it was revived by a new post.You are more than welcome to start your own thread detailing the issue at hand
and any troubleshooting steps (if any) you’ve tried so far. We will be more than happy to help!

Have you tried clearing the cache on the 360?

https://www.ign.com/wikis/xbox-360/How_to_Clear_the_Xbox_360_System_Cache

Hi there Newch,

Thanks for trying the troubleshooting steps above. I'm sorry to hear about the issue with Error 200 on the Xbox
360. Unfortunately, if the console is not responding the consoles hard drive may be affected. I recommend to try another Xbox 360 Hard drive.

For any device issues, I would recommend to
contact Customer Support
for further assistance or visit the Device service and Repair
site.

Hope this helps.

Hey there Killzone,

Sorry to hear you are running into these problems with the browser. Now is this happening on the Xbox One console or are you experiencing this through a PC or mobile device?

If on the Console go ahead and try to
Physically Power Cycle the console and then give it another try.

Let us know if this helps.