Sound input output xbox one

I have dish network receiver.

I plug the receiver hdmi out to the input on the splitter box.

than output one goes to my hdmi in on my tv so if you don't want to use Xbox just keep tv input on 1.

then output 2 from the box goes to Xbox receiver in and then Xbox output goes to my tv input 2

I know this sounds contusing, but the splitter mirrors the input of the cable or satellite receiver.

I have a Panasonic plasma and 3 hdmi inputs so I was fine. So my wife switches my tv to input 1 and I use input 2

Would they work in my setup? Sound output through TV, mic input through xbox?

In the Astro 50 what is transporting the mic input, is it the usb?

That is correct. With 2.0 input, Pro Logic IIz decodes like Pro Logic II (similarities into the center, differences into the surrounds) and steers non-directional sound into the height channels.

The method used in Pro Logic II is taking two signals - either the left and right inputs or their sum and difference - and balancing them in level so that the average level of the louder one matches the average level of the softer one. The results are then
added or subtracted to produce the output.

So for the center channel for instance, the left and right channels are adjusted so that the overall louder one of the two is reduced to the same average level as the other, then they are simply added together. This leaves all similarities between left and
right coming out the center channel, while uniquities between them diminishing the more unique they are, and differences cancelling each other out. Likewise, for the left and right outputs uniquities are extracted while similarities and differences between
the input left and right diminish.

As a sound travels from left to right, it will start appearing from the center output while diminishing in the left output, then momentarily come from only the center output, and start appearing in the right output as it diminishes in the center output.

So Pro Logic II basically "splices" the sound into the outputs based on the relationship between the input channels. One of the drawbacks is that similarities and differences between unrelated sounds tend to get extracted into the wrong outputs, hence the "magic
surround" effect and slight instability of the sound field with 2.0 input.

I don't know the specific method it uses for extracting the height channels in 2.0, but I assume that it simply lifts the front outputs into the height channels a bit when sound appears to be non-directional (the left-right and sum-difference axes of the inputs
both averaging out in level).

If the optical is plugged into the receiever straight from the 360 then it will output in the option selected on the xbox. What i think might be your issue is you may be on the wrong input on the reciever and the sound output from the tv is what ur actually
hearing which would prob be 2.0 sound. Make sure the reciever is set to the right optical input.

If your Xbox One is connected to the TV by HDMI it is that cable that carries the sound. The red and white connectors at the rear of the TV may be inputs rather than outputs hence no sound.

Is there another pair of red & white terminals at the rear of the TV?

Check the TV manual for Red and White outputs alternatively get an adapter for the headphone socket if your TV has one.