SmartRG: UPnP

Discus and support SmartRG: UPnP in XboX Networking Hardware to solve the problem; SmartRG (Modems/Gateways): UPnP SmartRG SR350N Login Information: Default Gateway – 192.168.1.1/admin Username – admin Password – admin UPnP... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Nov 19, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    SmartRG: UPnP


    SmartRG (Modems/Gateways): UPnP
    SmartRG SR350N

    Login Information:

    Default Gateway – 192.168.1.1/admin

    Username – admin

    Password – admin





    UPnP

    1. Open a web browser.
    2. Enter http://192.168.1.1/admin in the address bar and press enter.
    3. Enter “admin” for the username and “admin” for the password when prompted.
    4. Select Advanced Setup.
    5. Select UPnP.
    6. Toggle UPnP on or off depending on your need.
    7. Click the Apply/Save button.

    :)
     
    XBR Poseidon, Nov 19, 2014
    #1
  2. SparkStormrider
    SparkStormrider Guest
    Opening ports Smart RG

    With a SmartRG modem you will need to turn on UPnP to have an open NAT. By default it is not turned on. You'll have to contact your ISP and request it. That also goes for almost any other router. Usually enabling UPnP will change your NAT setting from
    moderate or strict, to open.
     
    SparkStormrider, Nov 19, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    SmartRG: Device Manual

    SmartRG (Modems/Gateways): Device Manual
    SmartRG SR350N

    Login Information:

    Default Gateway – 192.168.1.1/admin

    Username – admin

    Password – admin





    Device Manual

    Click
    here     for the manual.
     
    XBR Poseidon, Nov 19, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

SmartRG: UPnP