Razor pad doesn't connect.

marcinmazepa · Dec 18, 2018

Hi i have problem with pad razer wildcat its connected to usb but its not workin light on pad just blinks. Any Suggestions?

:)

ChiefJoboo

Please turn the console off and unplug it for 30 seconds and that may fix this temporary issue.

Plug the controller in and hold the Xbox button and the Menu button (3 lines button) for 10 seconds and see if that helps. This resets controllers sometimes that won't turn on properly - although not your exact issue.

If that doesn't help, you should contact Razer's support for help updating the controller's firmware or to see if this is a problem with the controller:

https://support.razer.com/contact-support/

The controller doesn't support wireless so it must be plugged in via USB all the time.

shadwell17

Try connecting only the suspected broken pad to the console via usb. If it doesn't work you know there is an issue with the pad.

VisageOfAnAngel

The Play and Charge kit doesn't allow a wireless controller to connect to a PC as a game pad. You'll need the wireless gaming receiver for a wireless controller to connect.

HuggyBear1985

Yea I have tried manually doing the update. Also when I power it up it does the update screen and won't let me do anything like go to the dashboard or connect to the controller. When I press the sync button the lights go in a circle then when I press the
sync button on the console or the pad the green ring flashes then the pad doesn't connect.

SpecArek

Device manager --> XINPUT compatible HID device --> Properties -->Details --> Bus numer

After XOWA installation and first controller (Pad A) connection it has value 2.

Next controller (Pad B) have value 3 and so on.

This value is increased each time you connect controller, so after Pad A disconnection and reconnection, Pad A will will have value 4.

As long as connection order fixed your situation this track is an dead end - no corelation between bus numer and controller issue.

My situation is like that:

Controller A (Model 1697) connected on bus 2 works.

Controller B (Model 1697) connected on bus 3 doesn't work.

A disconnected - B still doesn't work.

B disconnected and reconnected on bus 4 - B works.

A connected on bus 5 - A doesn't work.

And so on.

Tested with XOWA drivers:

19.29.20.953

20.24.34.491

21.50.45.656 (default selected by Windows)

21.50.58.120

Strange, because last one has greater version number than official driver.

All non standard versions taken from:
drivers.softpedia.com/dyn-search.php

None of listed works.

Razor pad doesn't connect.