Put out wireless lever

when you insert the clip and hit something solid you need to put some pressure on it, you are manually pushing a "lever" that pushes the disc out, not an electric release.

[quote user="Ronin6337"]

Set a piston next to the egg and a block next to the piston with a lever on it. Hit the lever and the egg will pop up so you can pick it up. There's no use for it except to look at it.

[/quote]

Or you could put a torch under it and break the block the egg is on.

I found out I have to pull the lever and not activate the pedestal.

Hello Rohit S, I am an independent advisor and I would be happy to help you today. My name is Khaji

I understand that you are experiencing a stick drift issue with your Xbox controllers.

Inspect your motion levers for stuck debris and be sure to move the motion levers to see if there is debris stuck inside.

Use compressed air to clean the movement levers and surrounding areas.

Use cotton swabs with ********* alcohol to thoroughly clean the movement levers

Rub a cotton swab with alcohol along the inner edges of the joystick to clean any internal debris. Let the controller dry for 1-2 minutes. Connect your wireless controller to your Xbox and test if stick drift persists

If the problem persists, repeat step 4, or replace the potentiometers on the controller.

Thank you very much for your patience and understanding! If you need anything else, don't hesitate to contact us again.

I do have a question about it! Is there a way to lock a door? For example, there is a button or lever on the outside of a door, and you press it to go in. There would be a lever on the inside or a button to open/close it as well, but is there a way to use
another lever to lock a door from the inside, in which the outside button/lever wouldn't work lol? I have some other questions, but I'll just ask that first! thank you!