Problem with Xbox one x when I went to press the Xbox button on the front of my console to...

Sync the Controller:
To sync a wireless controller with your Xbox, follow these steps:

Press the Xbox button on the controller to turn it on.
Press and hold the small sync button on the front of the Xbox Series X console (located near the USB port).
While holding the sync button on the console, press and hold the sync button on the controller (located on the top near the Xbox button).
Release both sync buttons when the controller's Xbox button starts flashing. The controller should now be synced with the console.

Hi Mark R! I hope you are well, delighted to be able to offer you my help!

I understand your problem, so I will try to help you as best as possible.

The first thing you should do is turn off the Xbox console by pressing and holding the Xbox button on the front of the console for about 10 seconds until it turns off completely.

Unplug the power cord from the console. Wait 10 seconds. Reconnect the console power cable. Press the console button on the Xbox to turn it on.

If the problem persists, you should try these other steps:

Turn off your console completely and remove the power and network cables for 30 seconds, then reconnect the power cable and proceed with these steps:

Step 1: Press and hold the Eject and Pair buttons on your console.

The Eject button is on the front of the original Xbox One console, right next to the disc drive, while the Pair button is on the left side, directly adjacent to the disc drive, with a symbol that looks like ")))" in it. . Note that on Xbox One X and Xbox One S, both buttons are on the front of the console, with the Bind button located directly below the Xbox button on the right edge. The Xbox One S Digital does not have an eject button, so the Bind and Xbox buttons will work. Once you're holding both buttons, press the Xbox (power) button on the front of the console.

Step 2: Release the Xbox button, but continue holding the Eject and Pair buttons for 10 to 15 seconds. Listen for two tones before releasing these buttons. The Xbox startup troubleshooter will appear shortly after.

Step 3: Select Reset this Xbox in settings and continue with factory reset (Saving your games and apps data).

Best regards,
Daniel.

Could you further describe your problem?

Is it not turning on or are you trying to connect it to your console?

You can do it via a cable connection to your console or by pressing the connect button on the controller which is on the top side next to the charging input and on the console either on the left side ( Xbox One) or on the front (Xbox One S and X)

You might have to re-sync the controller to the Xbox. Press the little button on the top of your controller until the home button flashes quickly then press the little button on the front of your Xbox one s or x or press the button next to the CD drive
on the Xbox one

when I had this problem I was on the internet so tonight I took my xbox one off line to see if I have any problems I have talk to xbox support about this . normaly when power cycle my xbox one console I press the buttom on the front of the console for 10
seconds then wait for 30 seconds then press the buttom on my xbox one to turn on .