Periodic Static Noise on Wireless Headsets via USB

Used my brothers brand new Turtle Beach DXL1 headset with my two week old Xbox One and same problem happens. I always play with wired controllers (deceases input lag), so I used the Play & Charge kit cable (a week old) for my Xbox One wireless controller
(two weeks old) every single time I play, which I plug into the back bottom USB slot. (When I use the Play & Charge cable to play, the data transfers over the cable like a wired controller, right?? I remember reading that somewhere) I plug my DXL1 headset
into the DSS2 Surround Sound Processor (both brand new), which plugs into the back top USB slot of my Xbox One. I also love to use chat, however, when I plug in the DXL1 chat cable into the Xbox One Stereo Headset Adapter (also brand new) on my controller,
there is an insane amount of static and white noise through headset speakers. When I unplug the mic, most of the static goes away. If I keep the mic plugged in, but I unplug the Play & Charge kit, then some of the static goes away. What it pretty much comes
down to is I can either choose between having both chat and wired controller but insane static noise, having chat with a wireless controller with less static noise, having a wired controller with no chat with even less static noise, or having a wireless controller
with no chat an having next to nothing of static noise.

When I have both the headset and controller plugged into my Xbox One, am I overloading the power source which is causing the static? Maybe the One cannot handle multiple things plugged into it at the same time (DXL1 Headset + Xbox One Controller)... Or maybe
it is the controller that cannot handle two things plugged into it at the same time (Play & Charge + Stereo Headset Adapter w/ mic). I tried plugging in the DXL1 Headset into my USB Samsung Galaxy Note 3 charger that plugs into the wall outlets instead of
my Xbox One and that seems to mitigate the problem a little bit. Only a little bit though.

I'm going to try another USB to micro-USB cable to use on my controller instead of the Play & Charge cable to see if that will help. If not, then I guess I'll just play with a wireless controller + chat, and charge the controller when I'm not playing. I
don't think the input lag with wireless is that severe, or is it?

Any tips, fixes, suggestions, comments are welcome please, thank you. :-]

Hi Jen

This doesn't either, I've noticed that the sound disappears when it is hardwired to the USB port on the console? Not sure if I'm hearing static noises as it is wireless.

Hi, I have the same problem as laser it seems or similar , I'm using a scuf controller and I'm trying to play wired and when i plug it into the controller with or without the batteries a constant static noise is present. Without the usb connected theres
no static noise when the batteries are in but i want to play with wired. The headset I'm using is the turtle beach headsets x12's through the headset adaptor.

I don't know what to do, any suggestions or solutions ?

Usually static implies a short within the connection somewhere, can also be caused by a dirty connector.

The Xbox 360 controller, assuming you’re using wireless only charges via USB. You would need to get the now discontinued 360 wireless adapter

Any Xbox one controller will connect via USB, Bluetooth, or the Xbox wireless adapter. You need to use USB or the Xbox adapter for headset support