paid 500$ for a xbox one not happy I will trade this for a ps4 if issues are not fixed soon

Hello,

Sorry to hear that you feel this way but this issue is on your end and not Microsoft/Xbox's

Error 807D0106 occurs when joining a party on Xbox One

You see the following error code when you try to join a party on Xbox One:

0x807D0106

This may mean that the Internet connection between your Xbox console and the other party members is failing. Often this is the result of incompatible Network Address Translation (NAT) types.

This means either your NAT or the person you're trying to connect to had a moderate or strict NAT. You can fix this by portforwarding.

This is what I want you to do

1. On your Xbox while on the home menu press the menu button and select
   Settings
2. From there you select Network
   
   You might want to write down the information on the right side;Subnet mask, Gateway
   
3. You then select Advanced settings This will allow you to configure your IP
   
4. You select manual DHCP selection and you will be prompted to enter an IP
   
   Try to make the IP in between 192.168.*.100 and 192.168.*.200
   
   The " * " stands for the subnet which you can copy from your gateway as this can differ for some people gateway usually looks like 192.168.0.1 so just copy the 0 in this case
   
   
5. After that you will be asked for the Subnet which you just copy from what your wrote down
   
   
6. You also just copy the gateway from what you wrote down

You now have a Static IP for your Xbox One

On to the next step

If you have a setup where you have BOTH a router and a gateway/modem you will need to enter your Xbox IP into the DMZ settings of your router and portforward your router on your gateway/modem

Also some names/terms might be called slightly different depending on which router/gateway you have but it should generally be the same

1. Go on your computer and gain access to your gateway settings
   
   This can be done by entering the gateway into a browser
2. On the sub tabs select Port Range Forwarding
3. In Start Port and End Port type in.
   
   • Port 88 (UDP)
   • Port 3074 (UDP and TCP)
   • Port 53 (UDP and TCP)
   • Port 80 (TCP)
   • Port 500 (UDP)
   • Port 3544 (UDP)
   • Port 4500 (UDP)
     
     On ports where it says UDP and TCP you can select
     Both from the dropdown menu

.

4.In IP Address type in the IP Address of the
Xbox.

5.Put a check in the Enable box.

6.Select Save Settings.

Now you have opened the required ports for the Xbox One, there should only be one step left

1. Click Setup across the top.
2. Click Lan Setup from the sub tabs.
3. Click the Pre-Assigned DHCP IP Addresses button.
4. Enter in the Xbox's MAC Address and IP Address.
5. Click Add Static IP.
   

Now Powercycle your Xbox and go back to network settings

• Test multiplayer connection
• Hold the bumpers and triggers on your controller to instantly load the detailed statistics
  
• If your NAT says open behind a cone network you should be set

Of course you could trade your PS4+Games in for an Xbox One bundle op.

If your local Gamestore accept trade ins then I am sure they will be more than happy to help you

if i understand it right even if the ps4 was selling for £500 it would be cheaper in the long term because you can trade in games.so by the time i have played 50 games on the x box one at £40 a time that equals £2,000.but if i play 50 games on the ps4 and
trade them in for an averageof £20 it will cost me £1000 a saving of £1000

I have had the same issue multiple times. I agree with a lot of the posts of having to reset being a load of crap. We spend $500 on a system, and have to get up, hold power button and wait 30 secs because microsoft can't get it together. I understand they
are aware of the issue, but I have already taken one xbox back to the store and had to trade it in for a new one cause of another issue they are aware of. My Kinect decided one night it just didn't wanna work anymore and was saying I needed to plug it in,
well I unhooked it, rehooked it, did a full system reset, went into the settings of my kinect and it still showed it was *** up. I google this issue to find there are a ton of other ppl having the same problem, and microsoft is sending new kinects to replace.
This kind of stuff shouldn't be happening, especially since they are the ones that made the kinect in the first place. Just wanted to put my .02 cents in about the issue, and hope that it gets fixed soon, or the one will go back to the store for a trade in
on a PS4.

I have the exact same problem. Have tried everything... but nothing works. Blacks on oled just appear grey. Xbox detects tv as HDR10, so there shouldnt be an issue... tried few cables, different inputs, etc. Hdr from other sources - Firestick looks as
it should, great. Tried my friends PS4 pro and that also works, so its not a problem in tv. Very sad that MS couldnt fix that issue. I will have to trade it for PS4 if they dont fix that SOON.