OSUDT problems

I am trying to restore my Xbox to factory settings so i downloaded the OSUDT for fac reset. but after unplugging the power for 30s then plugging it back in, put usb into the input and then pressing both bind key and eject and pressing the power soon after
there isnt a power tone after 15 seconds. ive tried to ask support for support but they never help with this issue

:)

 

Xbox One update Error 8b050033

MAF, can you confirm which version of the OSUDT tool you were using? There are two different files, one essentially is for consoles with the factory O/S build on it and no updates applied. If you tried the OSUDT tool before restoring to defaults, you likely
used OSUDT 2, which is the correct file for the August OS build. However, if you restored factory defaults and it went back to the ORIGINAL O/S build, you likely would need to download OSUDT version 1 and try that first.

Let me know, this is a frustrating issue!

 

Xbox one not showing anything on any hdmi port channel

If you used the OSUDT files then they may not work, there is however another file specifically for the factory restore.

The OSUDT files won't work if your system is already up to date.

 

Hi, it's vital that you extract the Restore Factory Defaults file correctly to the flash drive, there should be just a folder named $SystemUpdate on the flash drive when extracted correctly. If you're not hearing the expected power on tones when holding
bind/eject and pressing the power button it indicates the Xbox isn't seeing a viable update/factory restore directory on the flash drive.

I would format the flash drive and start over, extract the Restore Factory Defaults correctly and try again, if you are 100% sure that things are fine with the flash drive then try a different USB port on the Xbox.

Be sure to follow the steps exactly as shown on the link below.

support.xbox.com/.../offline-system-update-diagnostic-tool

 

Hi, you may try these steps. If the OSUDT is not being accepted by your console, you can load the console troubleshooter. Do this without the USB Flash drive

1. Press and hold Power, Eject and Bind button all at the same time.

2. Wait for 3 beeps and the troubleshooter will load.

3. Once the troubleshooter loaded, you will see 4 options "Reset, Turn Off, Continue, Update) Update will be grayed-out if you have no USB Flash Drive

4. Select Continue first if it will load your dashboard, if not

5. Select Reset then select Reset and Keep my Games and Apps

Hope this helps.