No video signal on Xbox One X Scorpio

Hi,

Yesterday I started to have problems with my Xbox Scorpio. I have been playing with it for some days, but yesterday didn't work.

My Xbox logo lights up, but the TV doesn't recognize any signal throw the HDMI input.

I have try with differents HDMI cables, differents inputs on the TV, enabling/disabling HDR on the TV, but nothing changes. I have connected to my computer screen, but have the same results.

I think the problem is on the HDMI output of the Xbox, because i can't hear anything from the TV, but if i connect my headphones to the controller, I can hear the sounds from the menu of Xbox.

What can I do?

Thanks.

:)

 

Xbox one X no signal on boot

Project Scorpio limited edition running into hdmi port 5 on a Vizio m60 c3 4k television . System boots up and turns on television . The info bar appears at the top of the tv and flickers the 2160p on and off. Then shows no signal. When I switch inputs
via the remote and cycle though all back to hdmi 5 then the Xbox one X signal shows and works. Is this common problem or a settings issue somewhere ?

 

Oh My Project Scorpio...

I've being prebook my Project Scorpio two month before the launching on 7 Nov in UAE. After travelling from hometown for one month I did open the box, plugged in the console and everything is fine until suddenly my Scorpio suddenly turned off and unable
to turned on since then.

So, I brought the unit back to reseller but there were no more Scorpio available for one to one exchange. Now, I'm stuck with Xbox One X with standard console (to play for this incoming holidays) and all the pre-booking, waiting and did took some days off
work to play with Scorpio became WASTED! There is no more special privilege feeling of having Xbox One X Project Scorpio limited edition as promoted two month before the launching.

Sad, sad and sad....

 

Hi PoLaQuiLLo.

Sorry you're having issues with your display. I woudl first try doing a hard reset, by following the steps below.

1. Turn off your console by holding the Xbox button on the front of the console for approximately 10 seconds.
2. Turn your console back on by pressing the Xbox button on the console or the Xbox button on your Xbox One wireless controller.

if that doesn't work please try to reset your display settings. Here's how:

1. If there's a disc in the Xbox One console, eject it.
2. On the console, press and hold the Xbox button for five seconds to turn off the console.
3. Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until
   the second beep occurs.
   Note This will boot your console in low resolution mode (640 × 480). To reset this setting, go to System > Settings in the guide, select Display & sounds, Video options, and then TV Resolution.
   
4. If you are required to complete these steps on every boot-up, you will want to change your TV connection to HDMI as shown in step 3 in the next section, "Your screen is blank and you use an AVR in your setup." For more information, see How
   to adjust the display settings on your Xbox One console.

Hope this helps!