No Signal with Samsung TVs

I’ve always been able to switch the console between my Samsung KU6300 and a smaller, older 720p Samsung TV, both using HDMI for connection.

However, starting a few weeks ago with the Xbox One S, i started receiving a “no signal” when connecting to the older Samsung TV. But it worked fine with the newer 4K Samsung TV. Then I got the Xbox One X and the same thing still occurred; only worked on
the newer Samsung TV.

Today, however, I was trying to troubleshoot the Xbox One X to the older tv again. And after several failed attempts, I switched back to the newer Samsung TV, and started receiving the same “no signal” issue.

One weird caveat to this is my PC connects to the older Samsung via HDMI just fine.

Before you ask, it is not a bad HDMI cord.

I’m in the preview program, so whatever the latest update is there is the software I’m using.

Any tips or troubleshooting techniques is greatly appreciated.

:)

 

XBOX s not connecting on UHD TV

Hi, I bought an XBOX one s and tried connecting it to my samsung UHD TV, It says no signal,

I tried it on my Non UHD TVs and there is no issue

Please help or advise

 

Samsung HDMI Connection

I have two Samsungs and theres a few tricks to try. Sometimes I'll get a No Signal screen until the dashboard loads up (which seems to take longer if I get the No Signal screen), sometimes I'll get the 360 globe splash/start-up screen. I used to have to
turn the 360 on, select the input and then restart the 360 to get a signal on my older Samsung. My two tvs won't list the HDMI input until the 360 is on as well, I can't even see the HDMI input until the 360 is on.

 

Hi Clemson Brownie

Sorry you're having issues with your video. First make sure you're plugged directly into the TV with the HDMI cable that came with your Xbox.

After that try the following steps.

[*]Turn off your console by holding the Xbox button on the front of the console for approximately 10 seconds.
[*]Turn your console back on by pressing the Xboxbutton on the console or the Xbox button on your Xbox One wireless controller.
[*]If you're still having issues try these steps to reset your display settings.

Reset your display settings. Here's how:

1. If there's a disc in the Xbox One console, eject it.
2. On the console, press and hold the Xbox button for five seconds to turn off the console.
3. Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until
   the second beep occurs.
   Note This will boot your console in low resolution mode (640 × 480). To reset this setting, go to System > Settings in the guide, select Display & sounds, Video options, and then TV Resolution.
   
4. If you are required to complete these steps on every boot-up, you will want to change your TV connection to HDMI as shown in step 3 in the next section, "Your screen is blank and you use an AVR in your setup." For more information, see How
   to adjust the display settings on your Xbox One console.