Network settings

PickleLuis · Feb 4, 2018

When I go to network setting I get poped up with error code 0x90070490. When I go online to see what the problem is, the code is not existing in the codes. How do I fix this problem do I can change my network.

:)

T Rod vX · Feb 4, 2018

Network Settings

Most of us like things different Pyro I like mine Auto

T Rod vX · Feb 4, 2018

Network Settings

Ok thanks now I understand thank you for your assistance.

III RainzZ III

this happening to me too its so anoying

GMAN990

Hi, if you are asking what is better in terms of speed a manual ip address or auto (DHCP) , there is no difference

Jenna Rossity

Have you tried a hard reset on the Xbox? Hold the xbox button down on the front until it shuts off. After this are you still getting the same speed? Have you also tried changing out the ethernet cable or a different port on the router? Also you could
try changing the DNS to Google which is 8.8.8.8 and 8.8.4.4 You can do this by going to your network setting on your Xbox. Push the Xbox button on your controller and on the left hand side go down to settings> All settings>Network>Network settings>Advanced
settings>DNS settings>Manual I hope this helps

{Parity}

When you did the hard reset did you unplug the power cable from the back of the console? If not try the hard reset again but this time unplug the power cable from the back of the XBOX for 5 minutes then try it again. Update with the results. Good Luck!

COD 2 HALO

Forward port 3075. Worked for me, but I do have my One on moderate for a while now. Just can't get it to open anymore.

Network settings