Netgear Netgear DGND3700: Port Forwarding

Netgear (Modems/Gateways) Netgear DGND3700: Port Forwarding
Netgear DGND3700

Login Information:

• Default Gateway - 192.168.0.1
• Username – admin
• Password – password

Port Forwarding

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Port Forwarding/Port Triggering under the Content Filtering section.
   
4. Click the Add Customer Service button.
5. Type a Service Name that has something to do with Xbox.
6. Set the Service Type to TCP/UDP.
7. Set both the Starting Port and Ending Port to 3074.
8. Enter the IP Address of your Xbox console in the Server IP Address space.
   
9. Click the Apply button at the bottom of the page.

Disable Port Forwarding

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Port Forwarding/Port Triggering under the Content Filtering section.
   
4. Select the rule that refers to either the IP Address of the Xbox Console and/or contains the Port 3074.
   
5. Click the Delete Service button at the bottom of the screen.

:)

 

Netgear Netgear DGND3700: Device Manual

Netgear (Modems/Gateways) Netgear DGND3700: Device Manual
Netgear DGND3700

Login Information:

• Default Gateway - 192.168.0.1
• Username – admin
• Password – password

Device Manual

Support Page.

 

Netgear Netgear DGND3700: Firmware

Netgear (Modems/Gateways) Netgear DGND3700: Firmware
Netgear DGND3700

Login Information:

• Default Gateway - 192.168.0.1
• Username – admin
• Password – password

How to Find Firmware Version

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Router Status from under the Maintenance section.
4. Make a note of the Firmware Version.

Firmware Update



Auto Update

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Router Upgrade from under the Maintenance section.
4. Click the Check button.
5. If a new version is available a message stating the old and new versions will be displayed.
   
6. Click the Yes button to start the upgrade.

Manual Update

1. Plug the computer into a LAN port via an ethernet cable.
2. Go to Support | NETGEAR
   
3. Locate the support page for the DGND3700 and download and save the latest version of firmware.
   
4. Login to the router by entering 192.168.0.1 in to the address bar.
   
5. Enter the username “admin” and the password “password”.
6. Select Router Upgrade from under the Maintenance section.
7. Click the Browse button and locate the file that was downloaded from Netgear’s support site.
   
8. Once the file is selected click the Upload button.