Netgear Netgear DGND3700: Multiple Console Support

Discus and support Netgear Netgear DGND3700: Multiple Console Support in XboX Networking Hardware to solve the problem; Netgear (Modems/Gateways) Netgear DGND3700: Multiple Console Support Netgear DGND3700 Login Information: Default Gateway - 192.168.0.1 Username –... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, May 18, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Netgear Netgear DGND3700: Multiple Console Support


    Netgear (Modems/Gateways) Netgear DGND3700: Multiple Console Support
    Netgear DGND3700

    Login Information:

    • Default Gateway - 192.168.0.1
    • Username – admin
    • Password – password



    Multiple Console Support

    We have no confirmed cases where multiple consoles were able to obtain an Open NAT state while using this device. Please comment on this page if you have been able obtain Open NAT on two or more consoles using this device.

    :)
     
    XBR Poseidon, May 18, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Netgear Netgear DGND3700: Device Manual

    Netgear (Modems/Gateways) Netgear DGND3700: Device Manual
    Netgear DGND3700

    Login Information:

    • Default Gateway - 192.168.0.1
    • Username – admin
    • Password – password



    Device Manual

    Support Page.
     
    XBR Poseidon, May 18, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Netgear Netgear DGND3700: Firmware

    Netgear (Modems/Gateways) Netgear DGND3700: Firmware
    Netgear DGND3700

    Login Information:

    • Default Gateway - 192.168.0.1
    • Username – admin
    • Password – password



    How to Find Firmware Version



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Router Status from under the Maintenance section.
    4. Make a note of the Firmware Version.


    Firmware Update



    Auto Update

    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Router Upgrade from under the Maintenance section.
    4. Click the Check button.
    5. If a new version is available a message stating the old and new versions will be displayed.
    6. Click the Yes button to start the upgrade.


    Manual Update

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Go to Support | NETGEAR
    3. Locate the support page for the DGND3700 and download and save the latest version of firmware.
    4. Login to the router by entering 192.168.0.1 in to the address bar.
    5. Enter the username “admin” and the password “password”.
    6. Select Router Upgrade from under the Maintenance section.
    7. Click the Browse button and locate the file that was downloaded from Netgear’s support site.
    8. Once the file is selected click the Upload button.
     
    XBR Poseidon, May 18, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Netgear Netgear DGND3700: Multiple Console Support