Netgear Netgear DGND3700: DMZ

Netgear (Modems/Gateways) Netgear DGND3700: DMZ
Netgear DGND3700

Login Information:

• Default Gateway - 192.168.0.1
• Username – admin
• Password – password

DMZ

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select WAN Setup from under the Advanced section on the left side.
   
4. Check the Default DMZ Server box and enter the IP Address of your Xbox console.
   
5. Click the Apply button at the bottom of the page.

Disable DMZ

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select WAN Setup from under the Advanced section on the left side.
   
4. Uncheck the Default DMZ Server box.
5. Click the Apply button at the bottom of the page.

:)

 

Netgear Netgear DGND3700: Device Manual

Netgear (Modems/Gateways) Netgear DGND3700: Device Manual
Netgear DGND3700

Login Information:

• Default Gateway - 192.168.0.1
• Username – admin
• Password – password

Device Manual

Support Page.

 

Netgear Netgear DGND3700: Firmware

Netgear (Modems/Gateways) Netgear DGND3700: Firmware
Netgear DGND3700

Login Information:

• Default Gateway - 192.168.0.1
• Username – admin
• Password – password

How to Find Firmware Version

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Router Status from under the Maintenance section.
4. Make a note of the Firmware Version.

Firmware Update



Auto Update

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Router Upgrade from under the Maintenance section.
4. Click the Check button.
5. If a new version is available a message stating the old and new versions will be displayed.
   
6. Click the Yes button to start the upgrade.

Manual Update

1. Plug the computer into a LAN port via an ethernet cable.
2. Go to Support | NETGEAR
   
3. Locate the support page for the DGND3700 and download and save the latest version of firmware.
   
4. Login to the router by entering 192.168.0.1 in to the address bar.
   
5. Enter the username “admin” and the password “password”.
6. Select Router Upgrade from under the Maintenance section.
7. Click the Browse button and locate the file that was downloaded from Netgear’s support site.
   
8. Once the file is selected click the Upload button.