Netgear Netgear DGN2200: DMZ

Discus and support Netgear Netgear DGN2200: DMZ in XboX Networking Hardware to solve the problem; Netgear (Modems/Gateways) Netgear DGN2200: DMZ Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Jul 16, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Netgear Netgear DGN2200: DMZ


    Netgear (Modems/Gateways) Netgear DGN2200: DMZ
    Netgear DGN2200

    Login Information

    • Gateway - 192.168.0.1
    • Username - admin
    • Password - password
    Netgear SmartWizard

    DMZ

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the user name and password the default user name and password are: "admin", "password".
    3. From the menu on the left under the advanced section select WAN Setup.
    4. Check the box next to Default DMZ Server.
    5. Enter the IP address assigned to the Xbox console you wish to DMZ.


    Disable DMZ

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the user name and password the default user name and password are: "admin", "password".
    3. From the menu on the left under the advanced section select WAN Setup.
    4. Uncheck the box next to Default DMZ Server.
    5. Select apply.


    Netgear Genie

    DMZ

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password.

      The default user name and password are: "admin", "password".
    3. Select Advanced from the tabs at the top.
    4. Select Setup.
    5. Select WAN Setup from the submenu.
    6. Check the box next to Default DMZ Server if it is not.
    7. Enter the IP address assigned to the Xbox console you wish to DMZ
    8. Select Apply.



    Disable DMZ

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password.

      The default user name and password are: "admin", "password".
    3. Select Advanced from the tabs at the top.
    4. Select Setup.
    5. Select WAN Setup from the submenu.
    6. Uncheck the Default DMZ Server
    7. Select Apply.


    :)
     
    XB1R Hades, Jul 16, 2014
    #1
  2. XB1R Hades
    XB1R Hades Guest
    Netgear Netgear DGN2200: Known Issues

    Netgear (Modems/Gateways) Netgear DGN2200: Known Issues
    Netgear DGN2200

    Login Information

    • Gateway - 192.168.0.1
    • Username - admin
    • Password - password


    Known Issues

    There are no known issues with this device.

     
    XB1R Hades, Jul 16, 2014
    #2
  3. XB1R Athena
    XB1R Athena Guest
    Netgear Netgear DGN2200: Device Manual

    Netgear (Modems/Gateways) Netgear DGN2200: Device Manual
    Device Manual

    Click
    here
    to go to a manual for this device
     
    XB1R Athena, Jul 16, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Netgear Netgear DGN2200: DMZ