Netgear Netgear DGN2200: Change Wireless Mode

Netgear (Modems/Gateways) Netgear DGN2200: Change Wireless Mode
Netgear DGN2200

Login Information

• Gateway - 192.168.0.1
• Username - admin
• Password - password

Netgear SmartWizard

Change Wireless Mode

1. Plug the computer into a LAN port via an ethernet cable.
2. Open web browser.
3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
4. The router will then prompt you to enter the user name and password the default user name and password are: "admin", "password".
   
5. Select Wireless settings from the left hand menu under Setup.
6. Select from the mode drop down "Up to 54Mbps".
7. Click Apply.

Netgear Genie

Change Wireless Mode

1. Plug the computer into a LAN port via an ethernet cable.
2. Open web browser.
3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
4. The router will then prompt you to enter the username and password.
   
   The default user name and password are: "admin", "password".
5. Select Basic from the tabs at the top.
6. Select Wireless from the left hand menu.
7. Select from the mode drop down "Up to 54Mbps".
8. Click Apply.

:)

 

Netgear Netgear DGN2200: Change Wireless Channel

Netgear (Modems/Gateways) Netgear DGN2200: Change Wireless Channel
Netgear DGN2200

Login Information

• Gateway - 192.168.0.1
• Username - admin
• Password - password

Netgear SmartWizard

Change Wireless Channel

1. Plug the computer into a LAN port via an ethernet cable.
2. Open web browser.
3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
4. The router will then prompt you to enter the user name and password. the default user name and password are: "admin", "password".
   
5. Select Wireless settings from the left hand menu under Setup.
6. From the drop down menu labeled Channel select the desired channel. (Channels 1,3,9,11).
   
7. Click Apply.

Netgear Genie

Change Wireless Channel

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
4. The router will then prompt you to enter the username and password.
   
   The default user name and password are: "admin", "password".
5. Select Basic from the tabs at the top.
6. Select Wireless from the left hand menu.
7. Select Wireless settings from the left hand menu under Setup.
8. From the drop down menu labeled Channel select the desired channel. (Channels 1,3,9,11)
   
9. Click Apply.

 

Netgear Netgear DGN2200: Known Issues

Netgear (Modems/Gateways) Netgear DGN2200: Known Issues
Netgear DGN2200

Login Information

• Gateway - 192.168.0.1
• Username - admin
• Password - password

Known Issues

There are no known issues with this device.