Netgear Netgear CG3100D: Overview

Netgear (Modems/Gateways) Netgear CG3100D: Overview
Netgear CG3100D

Login Information:

• Default Gateway - 192.168.0.1
• Username – admin
• Password – password

How to Find SSID (Network Name)

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Wireless Settings from the menu on the left.
4. Your network name is listed next to Name(SSID).

How To Find Wireless Passphrase (WPA/WEP)

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Wireless Settings from the menu on the left.
4. Your Wireless Passphrase can be found in the lower section next to Passphrase.
   

Changing Wireless Security Type/ Disabling Wireless Security

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Wireless Settings from the menu on the left.
4. From the Security Options section Select the desired security type, None if needed.
   
5. Click the Apply button if any changes were made.

MAC Filtering

*Not Available*

Change Wireless Channel

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Wireless Settings from the menu on the left.
4. From the drop down menu labeled Control Channel select the desired channel. (Channels 1,3,9,11)
   
5. Click Apply.

Change Wireless Mode

1. Plug the computer into a LAN port via an ethernet cable.
2. Login to the router by entering 192.168.0.1 in to the address bar.
   
3. Enter the username “admin” and the password “password”.
4. Select Wireless from the menu on the left.
5. From the 802.11 Mode drop down select “g only”.
6. Click the apply button at the bottom of the screen.

Change Wireless Band (Width)

*Not Available*

DHCP Reservation

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Lan IP from the menu under the Advanced section on the left side.
   
4. Enter the Desired IP, the MAC Address of your console in the provided fields.
   
5. Click the Add button under the Address Reservation section.

UPnP

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select UPnP from under the Advanced section on the left side.
4. Toggle UPnP on or off by checking or unchecking the Turn UPnP On box.
   
5. Click the Apply button at the bottom of the screen.

DMZ

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select DMZ Host from under the Advanced section on the left side.
   
4. Check the Default DMZ Server box and enter the IP Address of your Xbox console.
   
5. Click the Apply button at the bottom of the page.

Disable DMZ

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select DMZ Host from under the Advanced section on the left side.
   
4. Uncheck the Default DMZ Server box.
5. Click the Apply button at the bottom of the page.

Port Forwarding

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Port Forwarding under the Advanced section.
4. Type a Service Name that has something to do with Xbox.
5. Set the Protocol to Both.
6. Set both the Start Port and End Port to 3074.
7. Enter the IP Address of your Xbox console in the Server IP Address space.
   
8. Click the Add button at the bottom of the page.

Disable Port Forwarding

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Port Forwarding under the Advanced section.
4. Select the rule that pertains to port 3074.
5. Click the Delete button at the bottom of the screen.

Firewall

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Services under Content Filtering.
4. Uncheck Firewall features and IP Flood Detection
5. Click the Apply button at the bottom of the screen.

How to Find Firmware Version

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Router Status from under the Maintenance section.
4. Make a note of the Firmware Version.

Firmware Update

*Not Available*

Restore Factory Defaults

Through firmware

*Not Available*

Through Hardware

1. Plug the computer into a LAN port via an ethernet cable.
2. Locate the reset button on the bottom of the gateway.
3. Press and hold the reset button for 7 seconds.

Known Issues

*None at this time*

Multiple Console Support

We have confirmed that this network device is unable to support more than one console with an Open NAT.

Device Manual

Support Page.

:)

 

Netgear Netgear CG3100D: Change Wireless Band

Netgear (Modems/Gateways) Netgear CG3100D: Change Wireless Band (Width)
Netgear CG3100D

Login Information:

• Default Gateway - 192.168.0.1
• Username – admin
• Password – password

Change Wireless Band (Width)

*Not Available*

 

Netgear Netgear CG3100D: Known Issues

Netgear (Modems/Gateways) Netgear CG3100D: Known Issues
Netgear CG3100D

Login Information:

• Default Gateway - 192.168.0.1
• Username – admin
• Password – password

Known Issues

*None at this time*