Netgear Netgear CG3100D: DHCP Reservation

Netgear (Modems/Gateways) Netgear CG3100D: DHCP Reservation
Netgear CG3100D

Login Information:

• Default Gateway - 192.168.0.1
• Username – admin
• Password – password

DHCP Reservation

1. Login to the router by entering 192.168.0.1 in to the address bar.
   
2. Enter the username “admin” and the password “password”.
3. Select Lan IP from the menu under the Advanced section on the left side.
   
4. Enter the Desired IP, the MAC Address of your console in the provided fields.
   
5. Click the Add button under the Address Reservation section.

:)

 

Netgear Netgear 7550: DHCP Reservation

Netgear (Modems/Gateways) Netgear 7550: DHCP Reservation
Login Information

• Gateway - 192.168.1.254
• Username - N/A
• Password - Device Access Code printed on the device

DHCP Reservation

*DHCP Reservation is not available on this device.*

 

Netgear: DHCP Reservation

Netgear (Routers): DHCP Reservation
Netgear JWNR2000

Login Information

• Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net
  
• Username - admin
• Password - password

Netgear Smart Wizard - Light Blue

DHCP Reservation

1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
2. The router will then prompt you to enter the user name and password. The default user name and password are: "admin"/password.
   
3. Click LAN Setup on the left.
4. At the bottom of the page you will find the "Address Reservation" section. Click on "Add" to bring up a new menu.
   
5. In this menu, if the Xbox you want to add is already on the network, you can select it by clicking on the radio button next to the device. This will populate the fields with the information, alternatively you can enter the information manually then click
   "Add" to finish the process.

Netgear Genie - Black/Purple

DHCP Reservation

1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
2. The router will then prompt you to enter the username and password. The default user name and password are: "admin"/password.
   
3. Select Advanced from the tabs at the top.
4. Click Setup from the menu on the left.
5. Click Lan Setup in the submenu that appears.
6. At the bottom of the page you will find the "Address Reservation" section. Click on "Add" to bring up a new menu.
   
7. In this menu, if the Xbox you want to add is already on the network, you can select it by clicking on the radio button next to the device. This will populate the fields with the information, alternatively you can enter the information manually then click
   "Add" to finish the process.