Netgear: How to find firmware version

Discus and support Netgear: How to find firmware version in XboX Networking Hardware to solve the problem; Netgear (Routers): How to find firmware version How to Find Firmware Version Login to router by entering http://routerlogin.net in to the address... Discussion in 'XboX Networking Hardware' started by XB1R Hydros, Jun 12, 2014.

  1. XB1R Hydros
    XB1R Hydros Guest

    Netgear: How to find firmware version


    Netgear (Routers): How to find firmware version
    How to Find Firmware Version

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    3. Once logged in, select the Advanced tab from the tabs at the top.
    4. The Firmware version will be listed as Firmware Version.
    Firmware Update

    Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router finishes restarting! When the Ready light stops blinking, wait a few more seconds before doing anything.



    Auto Update



    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open web browser.
    3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    5. The Netgear smart wizard will automatically search for updates upon login, if an update is available click install.


    Manual Update



    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open web browser.
    3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    5. Select Advanced from the tabs at the top.
    6. Select administration from the menu on the left.
    7. Select Router Update from the submenu.
    8. In an alternate web browser or tab go to www.NETGEAR.com and download the updated software. If not done automatically, right click the downloaded file and extract the file.
    9. Click Browse. Locate and select the file you just downloaded and uncompressed.
    10. Click Upload to send the software to the router. This loads the new software in the router and causes the router to restart.
    11. Click Router Status and check the Firmware Version to verify that your router now has the new software installed.

    :)
     
    XB1R Hydros, Jun 12, 2014
    #1
  2. XB1R Hades
    XB1R Hades Guest
    Netgear: How to Find Firmware Version

    Netgear (Routers): How to Find Firmware Version
    Netgear JWNR2000

    Login Information

    Netgear Smart Wizard - Light Blue

    How to Find Firmware Version

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    4. From the left hand menu select Router Status.
    5. The firmware version will be listed as Firmware Version.


    Netgear Genie - Black/Purple

    How to Find Firmware Version

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    3. Select the Advanced tab from the tabs at the top.
    4. Select Administration from the menu on the left.
    5. Select Router Status under administration.
    6. The Firmware version will be listed as Firmware Version.
     
    XB1R Hades, Jun 12, 2014
    #2
  3. XB1R Hades
    XB1R Hades Guest
    Netgear: How to Find Firmware Version

    Netgear (Routers): How to Find Firmware Version
    Netgear KWGR614

    Login Information

    Netgear Smart Wizard *

    *This router is “open source” meaning custom versions of firmware can be created for its use. This walkthrough is only intended to be used on the default stock version of the firmware.

    How to Find Firmware Version

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    4. From the left hand menu select Router Status.
    5. The firmware version will be listed as Firmware Version.
     
    XB1R Hades, Jun 12, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Netgear: How to find firmware version