Netgear: Firewall

Discus and support Netgear: Firewall in XboX Networking Hardware to solve the problem; Netgear (Routers): Firewall Netgear WNR834M Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password... Discussion in 'XboX Networking Hardware' started by XB1R Hades, May 14, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Netgear: Firewall


    Netgear (Routers): Firewall
    Netgear WNR834M

    Login Information


    Netgear Smart Wizard - Light Blue

    Firewall

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    3. From the menu on the left select WAN Setup.
    4. Check the Disable SPI Firewall box.
    5. Change NAT filtering from secured to Open.


    :)
     
    XB1R Hades, May 14, 2014
    #1
  2. XB1R Apollo
    XB1R Apollo Guest
    Netgear: Firewall

    Netgear (Routers): Firewall
    Login Information


    Netgear Smart Wizard - Light Blue

    Firewall

    1. Login to router by entering
      http://routerlogin.net       in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    3. From the menu on the left select WAN Setup.
    4. Check the Disable SPI Firewall box.
    5. Change NAT Filtering from secured to Open.


    Netgear Genie - Black/Purple

    Firewall

    1. Login to router by entering
      http://routerlogin.net       in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password.

      the default user name and password are: "admin", "password".
    3. Select the Advanced tab from the tabs at the top.
    4. Select Setup setup from the menu on the left.
    5. From the submenu select WAN Setup.
    6. Check the Disable SPI Firewall box.
    7. Change NAT Filtering from secured to Open.
     
    XB1R Apollo, May 14, 2014
    #2
  3. XB1R Athena
    XB1R Athena Guest
    Netgear: Firewall

    Netgear (Routers): Firewall
    Netgear WNR1000

    Login Information

    • Gateway - 192.168.1.1, 10.0.0.1, or routerlogin.net
    • Username - admin
    • Password – password

    Netgear - Smart Wizard- Light Blue

    Firewall

    1. Login to router by entering
      http://routerlogin.net       in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    3. From the menu on the left select WAN Setup.
    4. Check the Disable SPI Firewall box.
    5. Change NAT Filtering from secured to Open.


    Netgear - Genie - Black/Purple

    Firewall

    1. Login to router by entering
      http://routerlogin.net       in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password.

      the default user name and password are: "admin", "password".
    3. Select the Advanced tab from the tabs at the top.
    4. Select Setup setup from the menu on the left.
    5. From the submenu select WAN Setup.
    6. Check the Disable SPI Firewall box.
    7. Change NAT Filtering from secured to Open.
     
    XB1R Athena, May 14, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Netgear: Firewall