Netgear: Entering PPPoE

Discus and support Netgear: Entering PPPoE in XboX Networking Hardware to solve the problem; Netgear (Routers): Entering PPPoE Netgear KWGR614 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin... Discussion in 'XboX Networking Hardware' started by XB1R Hades, May 2, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Netgear: Entering PPPoE


    Netgear (Routers): Entering PPPoE
    Netgear KWGR614

    Login Information

    Netgear Smart Wizard *

    *This router is “open source” meaning custom versions of firmware can be created for its use. This walkthrough is only intended to be used on the default stock version of the firmware.

    Entering PPPoE

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    4. From the left hand menu select Basic Settings.
    5. Where it says Does your internet connection require a login select yes.
    6. Enter the user name and password for your PPPoE in their respective fields.
    7. Select apply.


    :)
     
    XB1R Hades, May 2, 2014
    #1
  2. XB1R Hades
    XB1R Hades Guest
    Netgear: Entering PPPoE

    Netgear (Routers): Entering PPPoE
    Login Information


    Entering PPPoE

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net       in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Basic Settings.
    5. Where it says Does your internet connection require a login select yes.
    6. Enter the user name and password for your pppoe in their respective fields.
    7. Select apply.
     
    XB1R Hades, May 2, 2014
    #2
  3. XB1R Athena
    XB1R Athena Guest
    Netgear: Entering PPPoE

    Netgear (Routers): Entering PPPoE
    Login Information

    • Gateway - 192.168.1.1, 10.0.0.1, or routerlogin.net
    • Username - admin
    • Password – password

    Netgear - Smart Wizard- Light Blue

    Entering PPPoE

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net       in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Basic Settings.
    5. Where it says Does your internet connection require a login select yes.
    6. Enter the user name and password for your pppoe in their respective fields.
    7. Select apply.


    Netgear - Genie - Black/Purple

    Entering PPPoE

    1. Login to router by entering
      http://routerlogin.net       in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password.

      the default user name and password are: "admin", "password".
    3. Select the Basic tab from the tabs at the top.
    4. Select Internet from the the menu on the left
    5. Where it asks if your internet connection requires a login select yes.
    6. Input in your PPPOE user name and password.
    7. Select Apply.
     
    XB1R Athena, May 2, 2014
    #3
  4. GMAN990 Win User

    netgear wgr614v10 NAT strict

    Ok the issue is with the modem then, leave your router setup as it is now. You will need to "bridge" the modem (how you do that depends on the model of modem") and then enter your PPPoE details into your Netgear if your ISP uses PPPoE to connect

    www.unofficialguidetolive.co.uk/.../171-how-to-configure-a-netgear-router-to-use-pppoe

    You need to be prepared to do this change because if you don't have all of the info you need like the PPPoE username/password (if your ISP uses it) you can end up cutting yourself and have to reset the modem again.

    Its not hard to do I just wanted to make you aware that's all, and its the only way you will fix this.
  5. GMAN990 Win User

    Strict NAT with correct ports

  6. GMAN990 Win User

    Connecting multplie Xbox's to live over same connection

    As long as your modem supports ADSL2+ and you can bridge it that's all you need to be honest, all it needs to do is shift data from the Internet to your router and vice-versa all of the hard work is done by the router

    The DGTeam firmware sounds like a good option, so you could bridge it and then setup your router to use PPPoE hopefully

    www.unofficialguidetolive.co.uk/.../203-how-to-configure-a-netgear-router-to-use-pppoe     that is where you would enter the Sky username/password
  7. GMAN990 Win User

    ICMP Error

    Hi

    The Zyxel is a modem/router have you bridged the modem because if not you will suffer issues as you have two devices that are both NAT'ing otherwise , the Zyxel and the Netgear

    If you are not sure about bridging please contact your ISP as you may need additional details (PPPoE username/password) to enter into your Netgear before the change will work
  8. Rusty Pennyy Win User

    I have an Open NAT on my x360 but strict on XOne, please help.

    How do I configure my Netgear to perform the DSL login via PPPoE? I'm not sure how to do this.
Thema:

Netgear: Entering PPPoE

Loading...

  1. Netgear: Entering PPPoE - Similar Threads - Netgear Entering PPPoE

  2. I have an ATT netgear nighthawk WiFi box. Xbox is wired to it. Can’t get rid of double nat....

    in XBoX on Consoles
    I have an ATT netgear nighthawk WiFi box. Xbox is wired to it. Can’t get rid of double nat....: I have an ATT netgear nighthawk WiFi box. Xbox is wired to it. Can’t get rid of double nat. Help? de77dfab-8015-4fc4-8f14-51f0175cd6f9

  3. How Do I Connect With MYWIFIEXT for Netgear Extender Setup Via Mywifiext.net or...

    in XBoX on Consoles
    How Do I Connect With MYWIFIEXT for Netgear Extender Setup Via Mywifiext.net or...: I have New a Xbox console for playing Online games. I wanted to play games online and connect to my friends but I am unable to play Online games as my Netgear Range Extender is not connected with...

  4. How Do I Connect My Netgear Extender With My Xbox Game Console Via www.mywifiext.net?

    in XBoX on Consoles
    How Do I Connect My Netgear Extender With My Xbox Game Console Via www.mywifiext.net?: Hello, I recently got a new Xbox game console, but I am unable to play since my Netgear Extender is not connected to it. I have followed the steps below to connect the extender to the Xbox...

  5. How Do I Connect With www.mywifiext.net for Netgear WiFi Range Extender Via Mywifiext.net...

    in XBoX on Consoles
    How Do I Connect With www.mywifiext.net for Netgear WiFi Range Extender Via Mywifiext.net...: I have recently purchased a Xbox console for playing video games online because here in my city lockdown is going on and I wanted to play video games online and connect with my friends but I am...

  6. : How do I install my Netgear Range Extender Setup?

    in XboX Networking Hardware
    : How do I install my Netgear Range Extender Setup?: : How do I install my Netgear Range Extender Setup? Hello.. here is the step by step guide:- * Plug in your extender. ... * Connect your computer or mobile device to the extender's WiFi network....

  7. : R9000 Netgear router slow download and upload while connected with ethernet. cat 6a cable

    in XboX Networking Hardware
    : R9000 Netgear router slow download and upload while connected with ethernet. cat 6a cable: : R9000 Netgear router (didn't have the option to pick so picked R7000) slow download and upload while connected with ethernet. cat 6a cable Hello there @sleepshooter, I hope everything is going...

  8. How to Resolve Netgear mywifiext.net configurtaion Problem

    in XBoX on Consoles
    How to Resolve Netgear mywifiext.net configurtaion Problem: Facing problem related to installation or login of NetgearWi-Fi Extender? Consult www.mywifiext.net which have team of professionals to guide you in all the problems related to Wi-Fi setup. Our...

  9. Mywifiext.net Netgear Wifi Range Extender Setup

    in XBoX on Consoles
    Mywifiext.net Netgear Wifi Range Extender Setup: If you are attempting to link to the mywifiext.net setup or the latest extender configuration tab, you will be landing at the right spot. To complete your Netgear extender setup follow the steps...

  10. : NETGEAR WARNING: Recent firmware releases are corrupt

    in XboX Networking Hardware
    : NETGEAR WARNING: Recent firmware releases are corrupt: : NETGEAR WARNING: Recent firmware releases are corrupt I bought myself a Netgear Knighthawk X6S (R8000P)-AC4000, which had very strong reviews across multiple sources. And it is a very nice...